Impression Obsession Dies


Search these 167 items for

Click Picture to Zoom
Impression Obsession Tiny Flowers Die by Impression Obsession
This is a single die that cuts 36 flowers. Each flower measures around .375 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE140-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Spiral Flowers Dies by Impression Obsession
The smallest flower measures 3/4" x 3/4" and the largest measures 1" x 1-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE042-I - See More Items Like This

Click Picture to Zoom
Impression Obsession Rabbit Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The rabbits measure between .75 x 1 and 1.25 x 1.25 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE168-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Deer Die by Impression Obsession
The deer bending down is 7/8" x 1-3/8" and the deer looking up is 1-1/4" x 1-3/4". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE117-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Cat Die Set by Impression Obsession
The longest side of each cat is around 1". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE083-K - See More Items Like This

Click Picture to Zoom
Impression Obsession Sea Birds Die Set by Impression Obsession
The largest bird is 1-3/8" x 2" and the smallest is 3/8" x 5/8". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE078-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Bird Die Set by Impression Obsession
This is a set of ten separate dies wired together, they can be separated by snipping the wires. The birds all measure between .25 and .5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE154-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Grass Border Die by Impression Obsession
The border measures 1-1/8" x 4-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE060-I - See More Items Like This

Click Picture to Zoom
Impression Obsession Pine Branch Die by Impression Obsession
The branch measures 2" at its widest point and is 4" long. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE021-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Clouds Die Set by Impression Obsession
The smallest cloud is 3/8" x 5/8" and the largest one is 1-1/4" x 2-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE068-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Egg Set Die by Impression Obsession
The larger egg measures 1" x 1-1/4" and the smaller egg measures 3/4" x 1". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE041-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Feather Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest bird feather is 1.375 x 3.875 inches, the medium one is 1 x 2.875 inches, and the smallest one is 1.25 x 2 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE143-R - See More Items Like This

Click Picture to Zoom
Impression Obsession Hollyhocks Die Set by Impression Obsession
This is a set of six separate dies wired together, they can be separated by snipping the wires. The entire hollyhock measures 2.5 x 4.625 inches. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE169-R - See More Items Like This

Click Picture to Zoom
Impression Obsession Mason Jar Die Set by Impression Obsession
This is a set of 3 separate dies wired together, they can be separated by snipping the wires. The jar measures 1.5 inches and 2.5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE137-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Floral Lace Heart Die by Impression Obsession
The heart measures 3-1/4" x 3-1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE054-S - See More Items Like This

Click Picture to Zoom
Impression Obsession Leafy Branch Die by Impression Obsession
The branch measures 2" x 5-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE055-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Puppy Die Set by Impression Obsession
This is a set of five separate dog dies wired together, they can be separated by snipping the wires. The largest puppy measures 1.25 x 1.5 inches and the smallest is .75 x 1 inch. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE142-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Birch Trees Die by Impression Obsession
The trees are 4-7/8" tall and the birds are 5/8" tall. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE079-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Santa Christmas Die by Impression Obsession
The sleigh is 1-1/2" x 5-3/8". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE081-O - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Leaf Die Set by Impression Obsession
The leaves range from 1/4" x 3/4" to 1-1/8" x 1-1/8". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE095-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Grass Border Die by Impression Obsession
The border is 1/2" x 4-3/4". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE096-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Halloween Die Set by Impression Obsession
The ghost is 1", the pumpkin is 1" x 1-1/8", the house is 1-1/2", the witch is 1-1/2". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE114-O - See More Items Like This

Click Picture to Zoom
Impression Obsession Pumpkin Halloween Die by Impression Obsession
The pumpkin is 2". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE094-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Ocean Border Die by Impression Obsession
This is a set of two borders are 5-7/8" long. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE101-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Garden Animal Die Set by Impression Obsession
Features rabbits and squirrels. This is a single die with all 7 shapes, it coordinates with a stamp that stamps all of the pieces at once and an outline that the die fits into for easy alignment. The animals measure between .75 and 1 inch. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE151-L - See More Items Like This

Click Picture to Zoom
Impression Obsession Wheelbarrow Die by Impression Obsession
This is a single wheelbarrow measuring 1.75 x 3.75 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE165-H - See More Items Like This

Click Picture to Zoom
Impression Obsession Fir Trees Die Set by Impression Obsession
The trees are 1-3/4", 2-1/4", and 3-3/4" tall. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE084-V - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Snowflake Die Set by Impression Obsession
The snowflakes range from 1/2" to 1-1/2". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE100-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Grass Die by Impression Obsession
The grass measures 2-1/4" x 3". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE038-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Butterfly Die Set by Impression Obsession
The butterflies are around 1/2" - 3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE046-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Leaves Die Set by Impression Obsession
The group together measures 3" x 3-1/2", the largest leaf is 2-1/4" wide and the smallest is 1/2" wide. The gray veins are embossing features so that when cut, the veins are debossed, giving you a very realistic looking leaf. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE030-S - See More Items Like This

Click Picture to Zoom
Impression Obsession Shell Die Set by Impression Obsession
The starfish is 2" x 2", the scallop is 1-1/2", and the spiral shell is 5/8" x 1-7/8". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE077-W - See More Items Like This

Click Picture to Zoom
Impression Obsession Door & Window Die by Impression Obsession
The door measures 7/8" x 2-1/8" and the window measures 3/4" x 7/8". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE010-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Alphabet Plain Lowercase Die Set by Impression Obsession
This is a single die that cuts all 26 letters. They measure .4 inches tall with ascenders and descenders. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE157-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Birdhouse Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The birdhouses measure .75 x 3.375 and 1 x 2.75 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE156-H - See More Items Like This

Click Picture to Zoom
Impression Obsession Bunch of Blossoms Die Set by Impression Obsession
This is a set of six separate dies wired together, they can be separated by snipping the wires. They measures around 1 inch in diameter. This die set coordinates with clear set CS540 Bunch of Blossoms. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE148-L - See More Items Like This

Click Picture to Zoom
Impression Obsession Fancy Cutout Border Die by Impression Obsession
This is a single die measuring 1.25 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE152-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Heart Flourish Die by Impression Obsession
Impression Obsession die featuring a Heart Flourish. These dies are compatible with most tabletop die cut machines. This is a single die measuring 3.25 x 5.25 inches.

Craft Dies - Item #DIE126-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Large Bird on Branch Die by Impression Obsession
This is a single die measuring 2.5 x 3.875 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE161-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Pail Die Set by Impression Obsession
This is a set of 2 separate dies wired together, they can be separated by snipping the wires. The pail measures 1.5 x 1.5 inches and the handle is .75 x 1.5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE164-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Square Cutout Border Die by Impression Obsession
This is a single die measuring 1 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE172-I - See More Items Like This

Click Picture to Zoom
Impression Obsession Deer Trio Die Set by Impression Obsession
The group of three is approximately 3" x 3". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE080-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Bare Tree Die by Impression Obsession
The die measures 3-1/4" x 3-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE006-V - See More Items Like This

Click Picture to Zoom
Impression Obsession Leaf Cluster Die by Impression Obsession
The leaves measure 1/2" and 5/8". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE066-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Buttons Die Set by Impression Obsession
The largest button is 3/4" and the smallest is 1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE067-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Sled Die by Impression Obsession
The sled is 2" x 2-3/4". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE108-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Umbrella Die by Impression Obsession
The umbrella measures 1-3/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE049-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Bird Bath Dies by Impression Obsession
The bird bath measures 2" x 3-1/4" and the birds are approximately 3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE045-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Fence Border Die by Impression Obsession
The border measures 1" x 6" long. This die is designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE028-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Basket Die by Impression Obsession
The basket measures 2-3/4" x 3". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE039-T - See More Items Like This

Go to Page: 1 2 3 4

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!