Impression Obsession Dies


Search these 236 items for

Click Picture to Zoom
Impression Obsession Butterfly Die Set by Impression Obsession
The butterflies are around 1/2" - 3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
Craft Dies - Item #DIE046-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Snowflakes Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest measures 2-1/2", the middle one measures 2", and the smallest is 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
Craft Dies - Item #DIE024-X - See More Items Like This

Click Picture to Zoom
Impression Obsession Single Beach Chair Die Set by Impression Obsession
This is a set of five dies. The chair is 1-1/2 x 1-3/4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
Craft Dies - Item #DIE190-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Plane with Banner Die Set by Impression Obsession
This is a set of 2 dies. The plane is 3/4 x 1-1/2 inches. The banner is 1/2 x 3-1/4. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE186-G - See More Items Like This

Click Picture to Zoom
Impression Obsession Greeting Die Set by Impression Obsession
This is a set of 10 word dies featuring the sentiments "Thanks", "Thinking Of You", "Hello", "Happy Birthday", "To From", and "Wishes". The lowercase letters are 1/4 inch tall and the uppercase letters range between 1/2 inch and 3/4 inch. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE174-W - See More Items Like This

Click Picture to Zoom
Impression Obsession Palm Trees Die Set by Impression Obsession
This is a set of 4 dies. The palm tops are 1-1/4 x 1-1/2 inches, and the trunks are 1 and 1-3/8 inches tall. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE191-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Happy Birthday Word Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The happy word measures .875 x 2.5 inches and the birthday word measures 1 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

(2 reviews)
Craft Dies - Item #DIE166-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Pail Die Set by Impression Obsession
This is a set of 2 separate dies wired together, they can be separated by snipping the wires. The pail measures 1.5 x 1.5 inches and the handle is .75 x 1.5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE164-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Large Bird on Branch Die by Impression Obsession
This is a single die measuring 2.5 x 3.875 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE161-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Alphabet Plain Lowercase Die Set by Impression Obsession
This is a single die that cuts all 26 letters. They measure .4 inches tall with ascenders and descenders. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE157-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Stork Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The stork measures 2.5 x 3 inches and the bundle measures 1 x 1.625 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE167-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Large Fence Die by Impression Obsession
This is a single die measuring 2.875 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE149-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Garden Animal Die Set by Impression Obsession
Features rabbits and squirrels. This is a single die with all 7 shapes, it coordinates with a stamp that stamps all of the pieces at once and an outline that the die fits into for easy alignment. The animals measure between .75 and 1 inch. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE151-L - See More Items Like This

Click Picture to Zoom
Impression Obsession Cupids Die by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. Each cherub measures around 2.25 inches. These dies are compatible with most tabletop die cut machines. Perfect for Valentine's Day, weddings, anniversaries, and more!

Craft Dies - Item #DIE125-M - See More Items Like This

Click Picture to Zoom
Impression Obsession Halloween Die Set by Impression Obsession
The ghost is 1", the pumpkin is 1" x 1-1/8", the house is 1-1/2", the witch is 1-1/2". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE114-O - See More Items Like This

Click Picture to Zoom
Impression Obsession Shell Die Set by Impression Obsession
The starfish is 2" x 2", the scallop is 1-1/2", and the spiral shell is 5/8" x 1-7/8". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE077-W - See More Items Like This

Click Picture to Zoom
Impression Obsession Fir Tree Border Die by Impression Obsession
The border is 1-1/2" x 6". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE086-L - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Grass Border Die by Impression Obsession
The border is 1/2" x 4-3/4". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE096-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Large Snowflake Die by Impression Obsession
The die is 3-1/2" x 4-1/8". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE093-X - See More Items Like This

Click Picture to Zoom
Impression Obsession Swirly Christmas Tree Die by Impression Obsession
The tree is 3-1/2" x 3-3/4". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE091-P - See More Items Like This

Click Picture to Zoom
Impression Obsession Small Bow Die by Impression Obsession
The bow measures 1-1/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
Craft Dies - Item #DIE057-AA - See More Items Like This

Click Picture to Zoom
Impression Obsession Buttons Die Set by Impression Obsession
The largest button is 3/4" and the smallest is 1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE067-C - See More Items Like This

Click Picture to Zoom
Impression Obsession Beach Fence Die by Impression Obsession
This fence measures 1-1/2 x 3-1/4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE179-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Mini Nautical Die Set by Impression Obsession
This is a set of 8 dies. The anchor, life preserver, and wheel are around 1 inch, the lighthouse is 1-3/8 x 1-3/4 inches, and the fish are around 1/2 inch. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE184-L - See More Items Like This

Click Picture to Zoom
Impression Obsession Leaves & Stems Die Set by Impression Obsession
This is a set of 14 separate dies wired together, they can be separated by snipping the wires. The single leaves measure .5 x 1.125 inches and the stems with leaves measure .5 x 1.125 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE150-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Dog Die Set by Impression Obsession
This is a set of six separate dies wired together, they can be separated by snipping the wires. The dogs range from .75 x 1.125 to 1.25 x 2 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE170-R - See More Items Like This

Click Picture to Zoom
Impression Obsession Fancy Cutout Border Die by Impression Obsession
This is a single die measuring 1.25 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE152-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Feather Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest bird feather is 1.375 x 3.875 inches, the medium one is 1 x 2.875 inches, and the smallest one is 1.25 x 2 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE143-R - See More Items Like This

Click Picture to Zoom
Impression Obsession Thanks Word Die by Impression Obsession
This is a single die measuring .875 x 3 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE162-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Brick House Die by Impression Obsession
The main building is 3-1/8" x 2-3/4". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE119-Z - See More Items Like This

Click Picture to Zoom
Impression Obsession Cupcake Die Set by Impression Obsession
The main cupcake is 1-1/2". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE113-Q - See More Items Like This

Click Picture to Zoom
Impression Obsession Window with Shutter Die by Impression Obsession
The window is 2" x 2-7/8". These dies are compatible with most tabletop die cut machines.

(2 reviews)
Craft Dies - Item #DIE104-X - See More Items Like This

Click Picture to Zoom
Impression Obsession Cutout Christmas Tree Die by Impression Obsession
The tree is 2-1/2" x 3". These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE111-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Bare Christmas Tree Die by Impression Obsession
The tree is 2-1/2" x 4". These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE107-V - See More Items Like This

Click Picture to Zoom
Impression Obsession Grass Border Die by Impression Obsession
The border measures 1-1/8" x 4-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
Craft Dies - Item #DIE060-I - See More Items Like This

Click Picture to Zoom
Impression Obsession Sunglasses Die Set by Impression Obsession
The third pair down measures 1/2" x 1-1/4" and the fourth pair is 3/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
Craft Dies - Item #DIE048-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Bunny Die Set by Impression Obsession
The leaping bunny measures 1-1/2" x 1-1/2", the tall bunny measures 1" x 3/4", and the sitting bunny measures 1-1/4" x 1-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(3 reviews)
Craft Dies - Item #DIE043-G - See More Items Like This

Click Picture to Zoom
Impression Obsession Floral Lace Heart Die by Impression Obsession
The heart measures 3-1/4" x 3-1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(3 reviews)
Craft Dies - Item #DIE054-S - See More Items Like This

Click Picture to Zoom
Impression Obsession Layered Hearts Die by Impression Obsession
The heart measures 2-1/2" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE056-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Bare Branch Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The branch is approximately measures 3" x 4-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
Craft Dies - Item #DIE022-U - See More Items Like This

Click Picture to Zoom
Impression Obsession Fancy Tree Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The trees measure 1.5" x 3.5.". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE031-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Flags Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest one measures 3/8" x 2-1/2", the medium one is 1/2" x 2-1/4" and the smallest one measures 3/8" x 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE015-F - See More Items Like This

Click Picture to Zoom
Impression Obsession Love Birds Die by Impression Obsession
The branch and birds together measures 3-1/8" x 3-3/8". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

Craft Dies - Item #DIE058-N - See More Items Like This

Click Picture to Zoom
Impression Obsession Woody with Surfboard Die Set by Impression Obsession
This is a set of two dies. The surfboard is 2-5/8 inches long and the car is 3-1/4 inches long. These are US-made steel dies compatible with most table-top die cutting machines.

Craft Dies - Item #DIE180-J - See More Items Like This

Click Picture to Zoom
Impression Obsession Tiny Flowers Die by Impression Obsession
This is a single die that cuts 36 flowers. Each flower measures around .375 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
Craft Dies - Item #DIE140-D - See More Items Like This

Click Picture to Zoom
Impression Obsession Watering Can Die by Impression Obsession
This is a single die measuring 1.625 x 1.875 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE155-A - See More Items Like This

Click Picture to Zoom
Impression Obsession Birdhouse Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The birdhouses measure .75 x 3.375 and 1 x 2.75 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE156-H - See More Items Like This

Click Picture to Zoom
Impression Obsession Mason Jar Die Set by Impression Obsession
This is a set of 3 separate dies wired together, they can be separated by snipping the wires. The jar measures 1.5 inches and 2.5 inches. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE137-E - See More Items Like This

Click Picture to Zoom
Impression Obsession Square Cutout Border Die by Impression Obsession
This is a single die measuring 1 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE172-I - See More Items Like This

Click Picture to Zoom
Impression Obsession Circle Cutout Border Die by Impression Obsession
This is a single die measuring 1 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

Craft Dies - Item #DIE171-K - See More Items Like This

Go to Page: 1 2 3 4 5

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!