Impression Obsession Dies


Search these 460 items for
Impression Obsession Sunburst Background Die by Impression Obsession
Craft die featuring the sun and rays of sunlight. This die measures 3-3/4 x 5 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Shore Birds Die Set by Impression Obsession
This is a set of six dies. The small shore birds are 5/8 inch tall and the herons are 2-1/8 inches tall. These are US-made steel dies compatible with most table-top die cutting machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Greeting Die Set by Impression Obsession
This is a set of 10 word dies featuring the sentiments "Thanks", "Thinking Of You", "Hello", "Happy Birthday", "To From", and "Wishes". The lowercase letters are 1/4 inch tall and the uppercase letters range between 1/2 inch and 3/4 inch. These are US-made steel dies compatible with most table-top die cutting machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Easter Joy Die by Impression Obsession
Impression Obsession die featuring the sentiment "Easter Joy". This die measures 1-7/8 x 2-1/4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Holiday Top Word Edgers Die by Impression Obsession
This is a set of 3 Christmas themed word edgers. These will cut the letter so that they stick UP from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Palm Trees Die Set by Impression Obsession
This is a set of 4 dies. The palm tops are 1-1/4 x 1-1/2 inches, and the trunks are 1 and 1-3/8 inches tall. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Classic Truck Die Set by Impression Obsession
This is a set of 6 dies. The truck is 1-1/8" x 3-3/8".

(3 reviews)
See More Items Like This
 
Impression Obsession Egg Bunny Trio Die by Impression Obsession
Impression Obsession die featuring the Easter Bunny. This is a set of 4 dies. The egg bunnies measure 1-3/8 x 1-3/4 inch, 1 x 1-1/8 inch, and 3/4 x 1 inch.

These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Love Doves Die by Impression Obsession
Impression Obsession die featuring 2 birds and the word "Love". This die measures 1 x 3-3/4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Mixed Drinks Die Set by Impression Obsession
This is a set of nine dies. The largest drink is 1-1/2 inches tall and the smallest drink is 3/4 inch tall. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Small Grass Die Set by Impression Obsession
This is a set of 3 dies. The grass is 1-3/4 tall. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Tea Set Die by Impression Obsession
This is a set of 6 dies. The teacup is 1" x 1 1/4" and the teapot is 1 5/8" x 2 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Icicle Edger Border Die by Impression Obsession
This Winter themed edger die measures 1/2" x 5-7/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Bushel of Apples Die by Impression Obsession
This is an Autumn themed set of 4 dies. The barrel measures 1" x 1-1/8" and the apples are 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Greetings Top Edgers Die by Impression Obsession
This is a set of 3 word edgers featuring "Thanks so much", "Thinking of you", and "Happy Birthday". These will cut the letter so that they stick UP from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Happy Holidays Christmas Die by Impression Obsession
This die measures 2" x 3". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Manger Christmas Nativity Die by Impression Obsession
This is a set of 4 dies. The star is 1-1/4" x 2-1/8", the manger is 4" x 5-1/2", Joseph is 1-3/8" x 3-3/8", and Mary is 2" x 2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Rectangle 6-in-1 Frames Die by Impression Obsession
This die measures 3-3/4" x 5". It cuts 6 nesting frames at once. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Heart of Hearts Die by Impression Obsession
The heart measures 2-1/2" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Small Leaf Die Set by Impression Obsession
The leaves range from 1/4" x 3/4" to 1-1/8" x 1-1/8". These dies are compatible with most tabletop die cut machines.

(7 reviews)
See More Items Like This
 
Impression Obsession Bunny Die Set by Impression Obsession
The leaping bunny measures 1-1/2" x 1-1/2", the tall bunny measures 1" x 3/4", and the sitting bunny measures 1-1/4" x 1-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Small Bow Die by Impression Obsession
The bow measures 1-1/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Clouds Die Set by Impression Obsession
The smallest cloud is 3/8" x 5/8" and the largest one is 1-1/4" x 2-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(6 reviews)
See More Items Like This
 
Impression Obsession Small Grass Border Die by Impression Obsession
The border is 1/2" x 4-3/4". These dies are compatible with most tabletop die cut machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Watering Can Die by Impression Obsession
This is a single die measuring 1.625 x 1.875 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Fir Trees Die Set by Impression Obsession
The trees are 1-3/4", 2-1/4", and 3-3/4" tall. These dies are compatible with most tabletop die cut machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Pine Branch Die by Impression Obsession
The branch measures 2" at its widest point and is 4" long. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Small Deer Die by Impression Obsession
The deer bending down is 7/8" x 1-3/8" and the deer looking up is 1-1/4" x 1-3/4". These dies are compatible with most tabletop die cut machines.

(17 reviews)
See More Items Like This
 
Impression Obsession Snowflakes Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest measures 2-1/2", the middle one measures 2", and the smallest is 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Umbrella Die by Impression Obsession
The umbrella measures 1-3/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Alphabet Plain Lowercase Die Set by Impression Obsession
This is a single die that cuts all 26 letters. They measure .4 inches tall with ascenders and descenders. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Birdhouse Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The birdhouses measure .75 x 3.375 and 1 x 2.75 inches. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Egg Set Die by Impression Obsession
The larger egg measures 1" x 1-1/4" and the smaller egg measures 3/4" x 1". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Penguin and Igloo Die by Impression Obsession
The igloo is 2-1/4" x 3" and the penguin is 1-1/4" x 1-1/2". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Swans Die by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. Each swan measures approximately 2.25" x 2.5". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Christmas Tree Die by Impression Obsession
The tree measures 1-1/2" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Happy Birthday Word Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The happy word measures .875 x 2.5 inches and the birthday word measures 1 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

(5 reviews)
See More Items Like This
 
Impression Obsession Large Bird on Branch Die by Impression Obsession
This is a single die measuring 2.5 x 3.875 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Bow Die by Impression Obsession
The bow measures 2-1/4" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(8 reviews)
See More Items Like This
 
Impression Obsession Mason Jar Die Set by Impression Obsession
This is a set of 3 separate dies wired together, they can be separated by snipping the wires. The jar measures 1.5 inches and 2.5 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Ocean Border Die by Impression Obsession
This is a set of two borders are 5-7/8" long. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Round Ornament Christmas Die by Impression Obsession
The ball ornament is 2-1/2" in diameter. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Sunglasses Die Set by Impression Obsession
The third pair down measures 1/2" x 1-1/4" and the fourth pair is 3/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Bird Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The birds are around 3/4" wide and range from 1-1/2" to 2" long. This die set is designs by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Clothesline Die Set by Impression Obsession
This is a set of 16 separate dies wired together, they can be separated by snipping the wires. The clothing measures around 1 x 1.5 inches to 1.25 x 1.5 inches. This die set coordinates with CL539 Clothesline Set. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Door/Window Die by Impression Obsession
The die is 2" x 4-1/2". These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Fence Trio Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. Each section is around 1-3/4" long and the long posts are 1-3/4" tall. This die set is designs by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Garden Animal Die Set by Impression Obsession
Features rabbits and squirrels. This is a single die with all 7 shapes, it coordinates with a stamp that stamps all of the pieces at once and an outline that the die fits into for easy alignment. The animals measure between .75 and 1 inch. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Hill Town Die by Impression Obsession
The scene is 1-3/8" x 5-3/4". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Ice Cream Cone Die Set by Impression Obsession
The cone measures 1" x 1-1/2" and the ice cream scoops are 3/4" x 1". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8 9 10

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!