Impression Obsession Dies


Search these 507 items for
Impression Obsession Car and Camper Die Set by Impression Obsession
This is a set of three dies. The board is 1/2 x 1-1/2 inch, the car is 1 x 2 inches, and the camper is 1-3/8 x 2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Carolers Christmas Die by Impression Obsession
This is a set of 3 carolers. They are 1-1/2", 2-1/8", and 2-1/2" tall. These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Plane with Banner Die Set by Impression Obsession
This is a set of 2 dies. The plane is 3/4 x 1-1/2 inches. The banner is 1/2 x 3-1/4. These are US-made steel dies compatible with most table-top die cutting machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Bushel of Apples Die by Impression Obsession
This is an Autumn themed set of 4 dies. The barrel measures 1" x 1-1/8" and the apples are 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Christmas Icons Die by Impression Obsession
This is a set of 8 dies. They measure approximately 1" each on their longest side. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Mixed Drinks Die Set by Impression Obsession
This is a set of nine dies. The largest drink is 1-1/2 inches tall and the smallest drink is 3/4 inch tall. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Picket Fence Die by Impression Obsession
This fence die measures 1 3/4" x 5 1/4". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Squirrel Die Set by Impression Obsession
This is a set of 4 dies, three squirrels and a cluster of 3 acorns. The squirrels are 5/8" x 1-1/2", 7/8" x 1-1/8", and 1-1/8" x 1-1/2".

(8 reviews)
See More Items Like This
 
Impression Obsession Candle Christmas Die by Impression Obsession
This is a set of 3 dies, the base is 5/8" x 1-1/4", the candle is 1/2" x 1-1/2", and the flame is 3/8" x 5/8". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Coffee Set Die by Impression Obsession
This is a set of 4 dies. The pot is 2-1/8" x 2-1/2", the grinder is 1-3/4" x 2", the cup is 1-1/8" x 1-1/2", and the beans are 1/4" x 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Easter Greetings Die by Impression Obsession
Impression Obsession die featuring the sentiment "Easter Greetings". This die measures 2-5/8 x 3-1/8 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Holly Flourish Christmas Die by Impression Obsession
This die measures 3-1/8" x 3-3/8". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Mini Beach Fun Die Set by Impression Obsession
This is a set of nine dies. The tall sandcastle is 1-1/2 inches tall, the smaller castles are around 1 inch, and the pail is 5/8 inch. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Open Scroll Flower Die by Impression Obsession
Impression Obsession die featuring a flower. This die measures 3-3/8 x 3-3/4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Reading Tree Die by Impression Obsession
This is a set of 3 dies. The tree is 3-3/8" x 4-1/8", the girl is 7/8" tall and the boy is 3/4" x 2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Snowflakes Cutout Die by Impression Obsession
This is a Winter themed cutout set of dies. It includes three outline dies and three cutout dies you can use with or without the outline. The snowflake cutouts measure 1-3/4", 2", and 2-5/8". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Tea Set Die by Impression Obsession
This is a set of 6 dies. The teacup is 1" x 1 1/4" and the teapot is 1 5/8" x 2 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Wedding Cake Die by Impression Obsession
Wedding themed dies featuring the bride and groom on a wedding cake. This is a set of 9 dies. The cake pieces are 5/8 x 1-1/8 inch, 5/8 x 1-5/8 inch, and 5/8 x 2-1/8 inch. The roses are around 3/8 inch. The bows are 1/4 x 3/8 inch.

These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Boy with Flowers Die by Impression Obsession
Love themed Impression Obsession die featuring a boy holding flowers. This die measures 1-1/8 x 2-3/4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Doves in Love Die by Impression Obsession
Wedding themed Impression Obsession die featuring a pair of doves. This die measures 1-3/4 x 3-1/2 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Open Scroll Butterfly Die by Impression Obsession
Impression Obsession die featuring a butterfly. This die measures 3 x 4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Open Scroll Vine Die by Impression Obsession
Impression Obsession die featuring a leafy vine. This is a set of two mirror-image dies, both measuring 1-1/2 x 2-3/4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Ornate Rectangle Frame Die by Impression Obsession
Impression Obsession die featuring an Ornate Rectangle Frame. This die measures 3-1/4 x 5 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Snowy Roof Die by Impression Obsession
This is a set of two dies that coordinate with our house dies. There is a snowy roof die and an icicle die. They measure 2" x 3-5/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Tiny Apples Die by Impression Obsession
This is an Autumn themed die with a cluster of 32 tiny apples that measure 1/4". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession XO Border Die by Impression Obsession
Love themed Impression Obsession die featuring a border of "XO" sentiments. This die measures 1/2 inch x 4 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Shamrock Die by Impression Obsession
The leaf measures 1" x 1". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Small Snowflake Die Set by Impression Obsession
The snowflakes range from 1/2" to 1-1/2". These dies are compatible with most tabletop die cut machines.

(11 reviews)
See More Items Like This
 
Impression Obsession Bunny Die Set by Impression Obsession
The leaping bunny measures 1-1/2" x 1-1/2", the tall bunny measures 1" x 3/4", and the sitting bunny measures 1-1/4" x 1-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(4 reviews)
See More Items Like This
 
Impression Obsession Basket Die by Impression Obsession
The basket measures 2-3/4" x 3". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Dog Die Set by Impression Obsession
This is a set of six separate dies wired together, they can be separated by snipping the wires. The dogs range from .75 x 1.125 to 1.25 x 2 inches. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Watering Can Die by Impression Obsession
This is a single die measuring 1.625 x 1.875 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Fir Trees Die Set by Impression Obsession
The trees are 1-3/4", 2-1/4", and 3-3/4" tall. These dies are compatible with most tabletop die cut machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Santa Christmas Die by Impression Obsession
The sleigh is 1-1/2" x 5-3/8". These dies are compatible with most tabletop die cut machines.

(7 reviews)
See More Items Like This
 
Impression Obsession Birdhouse Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The birdhouses measure .75 x 3.375 and 1 x 2.75 inches. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Buttons Die Set by Impression Obsession
The largest button is 3/4" and the smallest is 1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Holly Leaf Cluster Christmas Die by Impression Obsession
The holly leaves are 1/2" long. These dies are compatible with most tabletop die cut machines.

(6 reviews)
See More Items Like This
 
Impression Obsession Leaves Die Set by Impression Obsession
The group together measures 3" x 3-1/2", the largest leaf is 2-1/4" wide and the smallest is 1/2" wide. The gray veins are embossing features so that when cut, the veins are debossed, giving you a very realistic looking leaf. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(6 reviews)
See More Items Like This
 
Impression Obsession Ocean Border Die by Impression Obsession
This is a set of two borders are 5-7/8" long. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Birds Die by Impression Obsession
The dies are each is 1-1/2" long and 1/2" tall. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Clothesline Die Set by Impression Obsession
This is a set of 16 separate dies wired together, they can be separated by snipping the wires. The clothing measures around 1 x 1.5 inches to 1.25 x 1.5 inches. This die set coordinates with CL539 Clothesline Set. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Fancy Cutout Border Die by Impression Obsession
This is a single die measuring 1.25 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Fir Sprig Die Set by Impression Obsession
Each sprig is 3/4" x 1". These dies are compatible with most tabletop die cut machines.

(6 reviews)
See More Items Like This
 
Impression Obsession Happy Birthday Word Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The happy word measures .875 x 2.5 inches and the birthday word measures 1 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

(5 reviews)
See More Items Like This
 
Impression Obsession Insect Die by Impression Obsession
Features butterflies, bees, a ladybug, and a dragonfly. This is a single die with all 7 shapes. The largest insect measures around 1.25 inches long and the smallest is around .4 x 1.4 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Tulip Die Set by Impression Obsession
This is a set of ten separate dies wired together, they can be separated by snipping the wires. The tulips measure .25 x 1 inch. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Alphabet Typewriter Uppercase Die Set by Impression Obsession
This is a single die that cuts all 26 letters. They measure .5 inches tall. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Bicycle Die Set by Impression Obsession
This is a set of seven separate dies wired together, they can be separated by snipping the wires. The bike measures 2.375 x 3.75 inches and the smaller pieces are around .75 x 1 inch. It coordinates with CL255 Riding Pretty clear set. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Bird Bath Dies by Impression Obsession
The bird bath measures 2" x 3-1/4" and the birds are approximately 3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Bird Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The birds are around 3/4" wide and range from 1-1/2" to 2" long. This die set is designs by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8 9 10 11

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!