Impression Obsession Dies


Search these 460 items for
Impression Obsession Ghosties Halloween Die by Impression Obsession
Halloween themed craft die featuring ghosts. This is a set of 8 dies. Each ghost is approximately 1 inch. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Gift Stack Cutout Die by Impression Obsession
This is a Birthday or Christmas themed cutout set of dies. It includes an outline die and a cutout die you can use with or without the outline. The outline measures 1-7/8" x 3-7/8" and the cutout gift stack measures 1-1/2" x 3-1/2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Good for You Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a single die measuring 2 x 3-1/8 inches.

See More Items Like This
 
Impression Obsession Greetings Bottom Edgers Die by Impression Obsession
This is a set of 3 word edgers featuring "Thanks so much", "Thinking of you", and "Happy Birthday". These will cut the letter so that they hang DOWN from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Halloween Cutout Circles Die by Impression Obsession
Halloween themed craft die featuring a witch, an owl, a haunted house, a skeleton, a spider, and "Boo". This is a set of 6 dies. They measure 1-1/4 inch in diameter. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Hinge Die by Impression Obsession
Craft die from Impression Obsession featuring a doorhinge. This is a single die measuring 1-3/8 x 1-1/2 inches.

See More Items Like This
 
Impression Obsession Holiday Bottom Word Edgers Die by Impression Obsession
This is a set of 3 Christmas themed word edgers. These will cut the letter so that they hang DOWN from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Hydrangea Blooms Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 18 dies that coordinate with a clear stamp set CL739. The watering can measures 1-5/8 x 2-1/2 inches, the hydrangea blooms are approximately 1 inch.

See More Items Like This
 
Impression Obsession Ice Skates Die by Impression Obsession
Craft die featuring ice skates. This die measures 1-3/8 x 2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Cabin Die by Impression Obsession
Craft die featuring a country cabin. This is a set of 7 dies. The assembled cabin measures 3 x 3-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Feather Die by Impression Obsession
This is a single die measuring 2 x 4.75 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Poinsettia Die Set by Impression Obsession
Christmas themed craft die featuring poinsettia flowers. This is a set of 3 dies. They measure 1-3/4, 2-1/4, and 2-3/4 inches in diameter. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Lily Trio Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies measuring 1-1/8 x 3, 1-3/8 x 3, and 1-1/4 x 3-1/4 inches.

See More Items Like This
 
Impression Obsession Looped Heart Border Die by Impression Obsession
Impression Obsession die featuring a border of hearts. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Love Border Word Die by Impression Obsession
Impression Obsession die featuring the word "Love". These dies are compatible with most tabletop die cut machines. This is a single die measuring 1.5 x 4.25 inches.

See More Items Like This
 
Impression Obsession Mini Beach Fun Die Set by Impression Obsession
This is a set of nine dies. The tall sandcastle is 1-1/2 inches tall, the smaller castles are around 1 inch, and the pail is 5/8 inch. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Mini Circle Tags Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The larger circles measure 1-1/8" x 1-1/8" and the smallest one measures 1" x 1". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Mini Rectangle Tags 2 Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The larger tags measure 3/4" x 1-1/2" and the small one measures 5/8" x 1-1/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Monkey Business Die by Impression Obsession
Craft die from Impression Obsession featuring many playful monkeys in the jungle.

See More Items Like This
 
Impression Obsession Nest & Hole Die by Impression Obsession
The circle measures 1" and the nest is 1" x 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Number Set Die by Impression Obsession
Impression Obsession dies featuring the numbers 0-9. This is a set of 10 dies wired together that can be separated by snipping the wires. They measure 7/8 inch tall. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Open Scroll Leaf Die by Impression Obsession
Impression Obsession die featuring leaves. This die measures 2-1/2 x 3-5/8 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Orchid Die by Impression Obsession
This is a set of 4 separate flower dies wired together, they can be separated by snipping the wires. The main section measures 2.13 x 3.13 inches. The other pieces are around 1.25 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Ornate Candlestick Die by Impression Obsession
Craft die featuring an Ornate Candlestick. This is a set of 5 dies. The candlestick measures 1 x 2.5 inches and the candle measures 1/4 x 1-1/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Patchwork Gator Die by Impression Obsession
This adorable alligator craft die from Impression Obsession is a set of 15 dies. The assembled gator measures 2-1/2 x 2-1/4 inches. Compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Patchwork Hippo Die by Impression Obsession
This adorable hippopotamus craft die from Impression Obsession is a set of 12 dies. The assembled hippo measures 2 x 2-1/2 inches. Compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Peppermint Block Die and Stamp by Impression Obsession
This is a set including one US-made steel die compatible with most table-top die cutting machines and one red rubber stamp. The stamp has a rectangular border around it so that it stamps the images AND a border around them. The border is the same size as the die. To cut out all the stamped images at once, you simply place the die within the border, and run it through your machine.

(1 review)
See More Items Like This
 
Impression Obsession Picket Fence Die by Impression Obsession
This fence die measures 1 3/4" x 5 1/4". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Pink Clouds Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 11 dies that coordinate with a clear stamp set CS748. The branches measure 1-1/4 x 4-1/2, and 1-1/2 x 3 inches.

See More Items Like This
 
Impression Obsession Pumpkin Border Die by Impression Obsession
Halloween or Autumn themed craft die featuring jack o'lanterns. This die measures 3/4 x 4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Reading Tree Die by Impression Obsession
This is a set of 3 dies. The tree is 3-3/8" x 4-1/8", the girl is 7/8" tall and the boy is 3/4" x 2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Red White and Blue Die by Impression Obsession
Craft die from Impression Obsession featuring many patriotic American decorations. Perfect for a 4th of July celebration.

See More Items Like This
 
Impression Obsession Retro Masculine Die by Impression Obsession
This is a set of 14 dies. The hats are approximately 1-1/4" wide, the tie s 1-7/8" long, the largest mustache is 1-1/4" wide, and the smallest mustache is 5/8" wide." These are US-made steel dies compatible with most table-top die cutting machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Scribble Stars Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies measuring 5/8, 2-1/2, and 2-1/4 inches in diameter.

See More Items Like This
 
Impression Obsession Sending Hugs Word Block Die by Impression Obsession
This is a single love themed die measuring 2-3/4 x 3-3/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Skeleton Halloween Die by Impression Obsession
Halloween themed craft die featuring a skeleton. This is a set of 14 dies. The skeleton measures 4-1/2 inches tall when assembled. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Small Cabin Die by Impression Obsession
Craft die featuring a country cabin. This is a set of 10 dies. The assembled cabin measures 2-1/2 x 2-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Snowflake Background Die by Impression Obsession
This die measures 3 3/4" x 5". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Snowflakes Cutout Die by Impression Obsession
This is a Winter themed cutout set of dies. It includes three outline dies and three cutout dies you can use with or without the outline. The snowflake cutouts measure 1-3/4", 2", and 2-5/8". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Spider Web Background Halloween Die by Impression Obsession
Halloween themed craft die featuring a spiderweb. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Spiral Rose Die by Impression Obsession
Craft die featuring rose flowers. This is a set of 6 dies. Each one measures 1 inch cut and approximately 1/2 inch when rolled. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Square Shaker Frame Die by Impression Obsession
The large frame is 3-3/4" square and the inner opening is 2-5/8" square. The small frame is 2-1/2" square with an 1-3/4" opening. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Stencil Alphabet Die Set by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Sunny Bunnies Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 18 dies that coordinate with a clear stamp set CL749. The big bunny measures 1 x 2-1/4 inches, the cart measures 1-1/4 x 1-1/2, and the word love measures 5/8 x 1-5/8 inches.

See More Items Like This
 
Impression Obsession Swirl Tree Die by Impression Obsession
The tree measures 3-1/2" x 3-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Swirly Christmas Tree Die by Impression Obsession
The tree is 3-1/2" x 3-3/4". These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession T-Shirt Die by Impression Obsession
This is a single die measuring 2-1/2 x 2-5/8 inches. Features a T-Shirt. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Teacup Die by Impression Obsession
Craft die from Impression Obsession featuring a small teacup. This is a single die measuring 1-1/2 x 3 inches.

See More Items Like This
 
Impression Obsession Tiaras Die by Impression Obsession
Craft die from Impression Obsession featuring 3 tiara crowns. This is a set of 3 dies. Two of the tiaras measure 1 x 1-3/4 and the other one measures 1-1/2 x 1-3/4 inches.

See More Items Like This
 
Impression Obsession Tree Landscape Layers Die by Impression Obsession
Craft die featuring a landscape with trees. This is a set of 3 edger dies. They have no bottom edge so you can make the layer however tall you want by using a paper trimmer. They are 6 inches wide. The tallest tree is 2 inches tall. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8 9 10

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!