Impression Obsession Dies


Search these 555 items for
Impression Obsession Falling Leaves Die by Impression Obsession
Craft die from Impression Obsession featuring Autumn leaves. This is a set of 16 dies. The largest leaf is approximately 1-3/4 and the smallest is around 1 inch. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Fancy Ornament Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The ornament measures 2-1/2" and the bow is 1-1/2" wide. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Feathers Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies. The feathers measure 1-1/8 x 3-1/8, 1 x 3-1/2, and 1-1/8 x 2-5/8 inches.

See More Items Like This
 
Impression Obsession Festive Christmas Ornaments Die by Impression Obsession
Craft die from Impression Obsession featuring Festive Christmas Ornaments. This is a set of 9 dies. The largest ornament is 2-1/4 x 3 inches and the smallest is 1 x 1 inch. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession File Folder Die by Impression Obsession
Craft die from Impression Obsession featuring a file folder. This is a single die measuring 2-3/4 x 4-1/2 inches.

See More Items Like This
 
Impression Obsession Fireplace Christmas Die by Impression Obsession
This is a set of 12 dies. The mantle measures 2-1/2" x 3-1/2", the hearth measures 1/2" x 3-1/2", and the inner brick section measures 2-1/8"x 2-5/8". The log is 1/4" x 1", the grate is 5/8" x 1-5/8", the fire is 1/2" x 5/8", the smallest stocking is 1/2" x 3/4" and the largest stocking is 1" x 1-1/2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Flags Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. The largest one measures 3/8" x 2-1/2", the medium one is 1/2" x 2-1/4" and the smallest one measures 3/8" x 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Floral Christmas Ornament Die by Impression Obsession
Craft die from Impression Obsession featuring a Floral Christmas Ornament. This is a single die measuring 3-1/4 x 4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Flower Vases Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 17 dies that coordinate with a clear stamp set CL741. The vases measure 1-1/8 x 1-7/8 and 1 x 1-3/4 inches and the flowers measure approximately 1 inch.

See More Items Like This
 
Impression Obsession Forest Die by Impression Obsession
Craft die featuring trees in a forest. This die measures 4 x 5 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Forest Flowers Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 10 dies that coordinate with a clear stamp set CL745. The frame measures 2-7/8 x 2-7/8 inches, the circle is 1-1/2 inches, and the enjoy is 1-3/4 inches.

See More Items Like This
 
Impression Obsession Fuchsia and Key Corners Die by Impression Obsession
Craft die from Impression Obsession featuring 2 corners, one with a key. This is a set of 2 dies measuring 2 x 2 inches.

See More Items Like This
 
Impression Obsession Garden Bird Die by Impression Obsession
Craft die from Impression Obsession featuring a bird in some flowers. This is a single die measuring 2-7/8 x 2-7/8 inches.

See More Items Like This
 
Impression Obsession Gift Card Foldover Birthday Die by Impression Obsession
Craft die from Impression Obsession featuring a Birthday Card. This is a set of 2 dies. The gift card foldover is approximately 3-7/8 x 5-1/4 inches unfolded. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Gift Card Pocket Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring a Christmas Card. This is a set of 2 dies. The gift card pocket is approximately 5 x 5-7/8 inches, and the three reindeer measure 1-1/4 x 2-1/2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Gift Snowfall Die by Impression Obsession
Craft die from Impression Obsession featuring a Winter background of snowflakes. This is a single die measuring 2-1/2 x 4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Gift Stack Cutout Die by Impression Obsession
This is a Birthday or Christmas themed cutout set of dies. It includes an outline die and a cutout die you can use with or without the outline. The outline measures 1-7/8" x 3-7/8" and the cutout gift stack measures 1-1/2" x 3-1/2". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Good for You Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a single die measuring 2 x 3-1/8 inches.

See More Items Like This
 
Impression Obsession Greetings Top Edgers Die by Impression Obsession
This is a set of 3 word edgers featuring "Thanks so much", "Thinking of you", and "Happy Birthday". These will cut the letter so that they stick UP from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Halloween Web Die by Impression Obsession
Craft die from Impression Obsession featuring a spiderweb with the words "Happy Halloween". This is a single die measuring 3-3/4 x 3-3/4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Happy Birthday Word Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The happy word measures .875 x 2.5 inches and the birthday word measures 1 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

(5 reviews)
See More Items Like This
 
Impression Obsession Heart Stems Die by Impression Obsession
The group measures 2" x 4-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(3 reviews)
See More Items Like This
 
Impression Obsession Heartfelt Holidays Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring a Christmas Tree. This is a set of 16 dies. The tree is approximately 2-3/4 x 3-7/8 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Ho Ho Ho Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring the Christmas sentiment "Ho Ho Ho". This is a single die measuring 1-1/4 x 2-1/8 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Ho Ho Ho Square Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring Santa Claus, his sleigh, and reindeer. This is a single die measuring 3-1/2 x 3-1/2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Holiday Bottom Word Edgers Die by Impression Obsession
This is a set of 3 Christmas themed word edgers. These will cut the letter so that they hang DOWN from the top of the piece of paper or card you are using. The die measures 1/2" x 4-1/4" but you can use a straight-edge and a knife or other cutting device to extend the baseline as long as you want. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Holiday Gate Die by Impression Obsession
Craft die from Impression Obsession featuring a Holiday Gate. This is a set of 16 dies. The gate is approximately 2-1/8 x 3-5/8 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Holiday Treats Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring Christmas cookies. This is a set of 7 dies. The stars are 1-1/2 x 1-1/2 inch, the large gingerbread man is 1-3/4 x 2-1/4 inches, the tree is 2-1/8 x 2-1/2 inches, the bells are 1-1/2 x 1-3/4 inch, the small gingerbread man is 1-1/4 x 1-5/8 inch and the house is 1-7/8 x 1-7/8 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Holly Flourish Christmas Die by Impression Obsession
This die measures 3-1/8" x 3-3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Hydrangea Die Set by Impression Obsession
The tall stem measures 2" x 5", the flowers are 1/4" x 1/4" and 1/2" x 1/2", and the leaves are 1-3/4" x 2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Ice Skates Die by Impression Obsession
Craft die featuring ice skates. This die measures 1-3/8 x 2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Icicle Edger Border Die by Impression Obsession
This Winter themed edger die measures 1/2" x 5-7/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Joy Frame Christmas Die by Impression Obsession
Craft die from Impression Obsession featuring the Christmas sentiment "Joy" along with a Christmas Ornament. This is a set of 6 dies. This is a set of 2 dies. The frame is approximately 3 x 3 inches, and the ornament is approximately 1-1/2 x 2-1/2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Large Bird on Branch Die by Impression Obsession
This is a single die measuring 2.5 x 3.875 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Cabin Die by Impression Obsession
Craft die featuring a country cabin. This is a set of 7 dies. The assembled cabin measures 3 x 3-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Candle Die by Impression Obsession
This large candle craft die from Impression Obsession is a set of 3 dies. The candle itself is 3-1/4 inches tall and 5/8 inch wide and the flame is 3/4 inch. tall. Compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Large Feather Die by Impression Obsession
This is a single die measuring 2 x 4.75 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Layered Floral Die Set by Impression Obsession
The flowers are around 1/2"-3/4" and the leaves are 3/8" x 5/8". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Let It Snow Die by Impression Obsession
Craft die from Impression Obsession featuring the Winter sentiment "Let It Snow". This is a set of 3 dies. The snow is approximately 1 x 2-1/4 inches, and the let it measures 1/2 x 1-1/8 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Lily of the Valley Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 5 dies. The leaves measure 5/8 x 2-1/2 inches. The stems with lilies measure 3/4 x 3-1/8 inches.

See More Items Like This
 
Impression Obsession Lily Trio Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies measuring 1-1/8 x 3, 1-3/8 x 3, and 1-1/4 x 3-1/4 inches.

See More Items Like This
 
Impression Obsession Looped Heart Border Die by Impression Obsession
Impression Obsession die featuring a border of hearts. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Love Border Word Die by Impression Obsession
Impression Obsession die featuring the word "Love". These dies are compatible with most tabletop die cut machines. This is a single die measuring 1.5 x 4.25 inches.

See More Items Like This
 
Impression Obsession Mason Jar Die Set by Impression Obsession
This is a set of 3 separate dies wired together, they can be separated by snipping the wires. The jar measures 1.5 inches and 2.5 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Medium Butterflies Die by Impression Obsession
Impression Obsession die featuring butterflies. This is a set of 9 dies. The butterflies are around 1 to 1-1/2 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Mini Circle Tags Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The larger circles measure 1-1/8" x 1-1/8" and the smallest one measures 1" x 1". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Miss You Die by Impression Obsession
This is a set of 2 dies. Miss measures 5/8 x 2-1/4 inches and You measures 1 x 1-7/8 inches. Features the sentiment "Miss You". These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Monkey Business Die by Impression Obsession
Craft die from Impression Obsession featuring many playful monkeys in the jungle.

See More Items Like This
 
Impression Obsession Nest & Hole Die by Impression Obsession
The circle measures 1" and the nest is 1" x 1-3/4". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Number Set Die by Impression Obsession
Impression Obsession dies featuring the numbers 0-9. This is a set of 10 dies wired together that can be separated by snipping the wires. They measure 7/8 inch tall. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8 9 10 11 12

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!