My Favorite Things Die-namics Dies


Search these 361 items for
Die-namics Layered Leaves Die by My Favorite Things
The Layered Leaves Die-namics coordinate with the Camellia Flower Die-namics and the Layered Vine Die-namics. This is a six piece die set. The largest leaves are approximately 2 1/4" x 1 1/4", the middle sized leaves are approximately 2' x 1 1/8", and the smallest leaves are approximately 1 3/4" x 1". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Baby Onesie Die by My Favorite Things
MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Cute Cameras Die by My Favorite Things
Craft dies featuring both vintage and modern cameras. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug. Use them together or separately! Die-namics dies cut through felt, cork, acetate, & SO much more!

See More Items Like This
 
Die-namics Grassy Edges Die by My Favorite Things
These steel dies will cut through cardstock, thin chipboard, 1/4 inch cork, felt, acetate, sticky back canvas, fabric, denim, sandpaper, 2mm craft foam, wood veneer paper, photo magnet sheets, and much more! They work with virtually any die-cutting machine that will accommodate wafer-thin dies and are sure to become an essential ingredient in your paper crafting process.

See More Items Like This
 
Die-namics Bicycle Die by My Favorite Things
Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

(1 review)
See More Items Like This
 
Die-namics Little Lowercase Letters Die by My Favorite Things
The Little Lowercase Letters Die-namics coordinate with the Little Letters Die-namics, the Little Numbers Die-namics, the Accent It - Celebrate Die-namics, and the Accent It - Story Starters Die-namics.

This is a 26 piece die set. Each die measures approximately 3/4" x 3/8" for letters like b and d, 1/2" x 3/8" for letters like a and c, and 1/2" x 1/2" for letters like m and w. MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Mini Royal Roses by My Favorite Things
Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug. Die-namics dies cut through felt, cork, acetate, & SO much more! Mini Royal Roses measures 1.75" diameter and 2.125" diameter.

(1 review)
See More Items Like This
 
Die-namics Photo Corners Die by My Favorite Things
Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug. Die-namics Photo Corner dies are 1 1/4" x 1 1/4". Die-namics dies cut through felt, cork, acetate, & SO much more!

See More Items Like This
 
Die-namics Circle STAX Set 1 Dies by My Favorite Things
Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug. Circle STAX Set 1 Dies measure 4.25" in diameter. 10 piece set. Die-namics dies cut through felt, cork, acetate, & SO much more!

See More Items Like This
 
Die-namics Stitched Collage Frame Die by My Favorite Things
Create a quilt effect, a multiple-compartment shaker look, or frame images, words, or letters with this versatile design that works in either a horizontal or vertical orientation. The collage includes five sections and features a single stitch line through the center of the framework. The Stitched Collage Frame Die-namics measures 4" x 5 1/4". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

(1 review)
See More Items Like This
 
Die-namics Essential Fishtail Sentiment Strips Die by My Favorite Things
This quartet of double-ended fishtail sentiment strips includes elements sized to fit our Essential Sentiments stamp sets as well as a host of sentiments featured in our other sets. Additionally, they can be used as colorful accents by layering. This 4 piece set includes strips measuring 4" x 7/16", 3" x 7/16", 2 1/2" x 7/16", 1 3/4" x 7/16". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Fringed Scallop Borders Die by My Favorite Things
These fringed borders feature a gently scalloped edge perfect for creating looks ranging from elegant to playful. One border is straight while the second is bowed for beautiful draping opportunities. This 2 piece set includes borders measuring 5 3/4" in length. MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Ocean View Porthole Die by My Favorite Things
Create a room with a view with the Ocean View Porthole Die-namics. This set - in combination with our extensive assortment of sea-themed products - allows you to peek in OR out of your scene.

The Ocean View Porthole measures 3 5/8".

See More Items Like This
 
Die-namics Stitched Fishtail Sentiment Strips Die by My Favorite Things
This sentiment strips set will quickly become as essential tool in your die collection. The three included sizes will beautifully house almost any sentiment in your stash resulting in a beautifully finished element for your cards and projects. This Die-namics will layer perfectly with the Fishtail Flag Frames Die-namics as well - they measure identically and will back your frames, without the stitching showing, creating a lovely two-tone effect.

This 3 piece set includes strips measuring 4 1/2" x 7/8", 4" x 3/4", and 3 1/2" x 5/8".

See More Items Like This
 
Die-namics Celebrate Speech Bubble Die by My Favorite Things
Go bold with your celebratory greetings with this striking Die-namics. This piece features the word CELEBRATE spaced over three lines of text. Use the speech bubble as an accent, as an element in a fun shaker assembly, or use the resulting letters alone or inlaid back into the speech bubble - there are an endless variety of ways to play with this exciting design! The Celebrate Speech Bubble measures 2 3/4" x 4 7/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Mini Mail Die by My Favorite Things
The Mini Mail Die-namics includes everything you need to craft adorable mini envelopes. Showcase your tiny envelopes singularly or in groups. Use them as a decorative accent or insert tiny notes featuring one of the stamp sentiments or your own handwritten greeting. This 10 piece set includes: Envelope 1 5/8" x 1 3/8" folded, Liner 1 1/2" x 1 1/4", Notecards (2) 1 1/2" x 1 1/4", Seal 3/8", Postage 5/16" x 3/8", Heart 3/8", Sentiment strip 2 7/8" x 1/2", Confetti (2) (individual confetti measures 3/16"). MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Puppy Pals Die by My Favorite Things
This Die-namics coordinates with the Puppy Pals stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die.

This 10 piece set includes: Puppies (6) 1 7/8" x 1 1/2", 1 7/8" x 1 5/8", 1 5/8" x 2", 2" x 1 5/8", 1 1/2" x 2 1/8" Bones (2) 5/8" x 1/2", 5/8" x 5/16", Ball 5/8", Bowl 7/8" x 1/2". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Smitten Kitten Die by My Favorite Things
This Die-namics coordinates with the Smitten Kitten stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. This Die-namics collection also includes a blanket die to create a cozy spot for your kittens to relax or play.

This 10 piece set includes: Kittens (5) 1 3/8" x 1 3/4", 1 3/8" x 1 3/4", 1 3/4" x 1 3/8", 1 3/4" x 1 7/8", 1 5/8" x 1 3/4", Hearts (2) 1/2" x 1/2", 3/8" x 3/8", Bowl 3/4" x 7/16", Bow 9/16" x 3/8", Blanket 1 7/8" x 3/4". p>MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Abstract Heart Die by My Favorite Things
The Abstract Heart Die-namics is a geometric heart shape with an abstract pattern perfect for creating chic Valentine designs. Use this Die-namics as a lacy die cut or inlay different colored card stocks to create a beautiful and unique element on cards or scrapbook pages. This Abstract Heart Die-namics measures 3" x 2 1/4". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Blueprints 24 Die by My Favorite Things
The Blueprints line of Die-namics is designed to take the guesswork out of starting your next card project. Whether you're short on time or simply need a jumpstart, Blueprints is your answer. Each Blueprints set includes a digital design plan for you to follow or, use the included elements to become your own architect and create something completely new and unique. All of our Blueprints coordinate so that you can mix and match elements from different sets. Each Blueprints set comes to you with smaller elements nested within larger to give you more value for your money. Interior elements are deburred and detabbed for your convenience - these dies are ready to use right out of the package. A magnetic backing is also included with each Blueprints set to provide easy and neat storage.

Blueprints 24 is party-ready with a variety of celebratory elements. Build a banner with the two included banner elements - one featuring two rounded corners and the other, a fishtail flag design with emboss line detailing. Use the circle to create both a window element and a layering piece with a stitched perimeter. Build your design on a stitched rectangle base and complete the look with a rounded corner sentiment strip, stitched tab, and sequins in one of two styles and two designs.

This 10 piece set includes: Stitched panel 3 7/8" x 5 1/8", Rounded corner banner 3 1/8" x 3 7/8", Fishtail flag banner 2 5/8" x 3 1/2", Stitched circle 2 1/8", Sentiment strip 3 1/2" x 5/8", Tab 1 3/4" x 5/8", Large circle sequins 3/8", Small circle sequins 1/4", Large star sequins 7/16", Small star sequins 5/16".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Cheerful Cages Die by My Favorite Things
This Die-namics complements the Tweet Friends stamp set and will help you create lovely and intricate bird cages. Choose from two different styles and piece together a pretty little home for one of your favorite feathered friends. These Die-namics are similar in size to the stamp images in Tweet Friends and will layer with the Tweet Friends Die-namics beautifully.

This 10 piece set includes: Cage A 1 3/4" x 3 1/2", Base 1 3/4" x 3/4", Crossbars (2) 1 5/8" x 1/16", Hanger 3/4" x 5/8", Cage B 1 13/16" x 3 1/8", Base 1" x 3/16", Crossbars (2) 1 13/16" x 1/16" and 1 9/16" x 1/16", Hanger 1/4" x 7/16".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Circle Spinner Channels Die by My Favorite Things
This Die-namics allows you to create clever scenes with circular interactive slider and spinner elements. Any stamp or Die-namics from My Favorite Things can benefit from a little interactive fun! With three different lengths, you can choose how long you want your circular path to be - from just a small rocking motion to a full circle. The Circle Spinner Channels Die-namics includes 3 channels: Large 8 1/4" x 1/4", Medium 5 3/4" x 1/4", and Mini 1 1/4" x 1/4". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

(1 review)
See More Items Like This
 
Die-namics Confetti Numbers Die by My Favorite Things
Confetti numbers allows you to spend less time die cutting and MORE time creating! This set includes (8) of every number (the six also serves as a nine) - each positioned on a single die. The diminutive size is perfect for creating shaker card filler for birthdays and anniversaries. This 9 piece set includes numbers measuring 3/8" in height. MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Gift Card Envelope Die by My Favorite Things
Cut, fold, and adhere the flaps to quickly create an envelope sized to perfectly house a standard gift card. This classic design allows you to create an envelope perfect for any gift-giving occasion. The Gift Card Envelope measures 3 1/2" x 2 1/4" when assembled. MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Happy Greetings Die by My Favorite Things
Love, hello, happy - three words that are integral to crafting heartfelt greetings. This set features all three in a clean, simple, sans serif font.

This 3 piece set includes: Love 1 5/8" x 3/4", Hello 2" x 3/4", Happy 2 1/8" x 3/4".

See More Items Like This
 
Die-namics Happy Hippos Die by My Favorite Things
This Die-namics coordinates with the Happy Hippos stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. This 15 piece set includes: Hippos (4) 1 3/8" x 1 7/8", 7/8" x 1 1/4", 1 7/8" x 1 1/2", 1 5/8" x 1 3/4", Birds (3) 5/8" x 5/8" each, Hats (2) 1/2" x 5/8", 5/16" x 3/8", Cake 1 1/8" x 1 3/4", Balloons 1 1/4" x 1 5/8", Bow 1/2" x 5/16", Cupcake stand 1 1/8" x 1 5/8", Cupcake 1/2" x 1/2", Cherry 3/16" x 5/16". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Jungle Gym Die by My Favorite Things
This Die-namics coordinates with the Jungle Gym stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die.

This 8 piece set includes: Swing scene 4 3/8" x 3 3/8", Jump rope scene 3 3/8" x 1 3/4", Slide scene 1 7/8" x 2", Birds (2) 5/8" x 3/4" each, Leaves (2) 3/8" x 1/2", 1/4" x 7/16", Snail 5/8" x 1/2". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Layered Umbrella Die by My Favorite Things
The Layered Umbrella Die-namics coordinates with the Blue Skies Ahead stamp set, and the Pure Innocence Sunny Thoughts stamp set. The Layered Umbrella Die-namics is a three piece die set. The umbrella measures approximately 3" x 3", the umbrella overlay measures approximately 1" x 3", and the handle measures approximately 3/4" x 1/2". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Mini Doily Circles Dies by My Favorite Things
Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug. Mini Doily Circles Dies measure 1.75" in diameter. Die-namics dies cut through felt, cork, acetate, & SO much more!

See More Items Like This
 
Die-namics Pure Innocence Happy Cake Day Die by My Favorite Things
This Die-namics coordinates with the Happy Cake Day stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. The Happy Cake Day Die-namics measures 1 3/8" x 3 1/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Sailboat Die by My Favorite Things
The Sailboat Die-namics coordinate with the Making Waves Die-namics and Waves Stencil. This is a seven piece die set. The approximate measurements of the Sailboat Die-namics are - Boat 2 1/4" x 5/8", Mast 2 1/2" x 1/8", Sails 1 1/4" x 2 and 1" x 2", Flag 5/8" x 3/16", Large Start 1/4", Small Star 3/16". MFT Die-namics dies are EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Springtime Blooms Die by My Favorite Things
This Die-namics coordinates with the Springtime Blooms stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. This 11 piece set includes: Flowers with stems (5) 1 3/4" x 2 3/4", 1" x 1 1/2", 15/16" x 1 5/8", 15/16" x 1 1/4", 3/4" x 1 5/8", Flower heads (6) 1 1/2" x 1 3/8", 1 3/8" x 1", 1 1/4" x 7/8", 7/8" x 5/8", 5/8" x 1/2", 5/8" x 5/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Stitched Circle Frames Die by My Favorite Things
The Stitched Circle Frames include a beautiful stitched detail running around the inner and outer perimeter of the die cuts for beautiful framing of your images, sentiments, and layering pieces.

This 3 piece set includes dies measuring: 4 1/4" with interior measurement of 3 1/2", 3 1/4" with interior measurement of 2 1/2", 2 1/8" with interior measurement of 1 3/8".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Stitched Mini Scallop Circle STAX Die by My Favorite Things
Spice up your projects with this this versatile Die-namics. The Stitched Mini Scallop Circle STAX creates layering pieces that double the fun with a delicate scalloped border as well as a stitched perimeter. This 5 piece set includes circles measuring: 3 7/8", 3 1/4", 2 5/8", 2", 1 3/8".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Stitched Rectangle Scallop Edge Frames Die by My Favorite Things
Die-namics die from My Favorite Things featuring a set of nested frames.

This 4 piece set includes frames measuring: 4" x 5 1/4" with an interior measurement of 3 1/2" x 4 3/4", 3 1/4" x 4 1/2" with an interior measurement of 2 3/4" x 4", 2 1/2" x 3 3/4" with an interior measurement of 2" x 3 1/4", and 1 3/4" x 3" with an interior measurement of 1 1/4" x 2 1/2".

The Stitched Rectangle Scallop Edge Frames feature a beautiful stitched detail running around the interior edge of the die cuts and sweet, dainty scallops around the outside perimeter for beautiful framing of your images, sentiments, and layering pieces as well as for creating shaker cards.

(1 review)
See More Items Like This
 
Die-namics Stitched Rectangle Word Windows Die by My Favorite Things
This indispensable Die-namics features three dies designed to create a rectangle window in your card fronts and panels accented by a stitched line perimeter. Alternatively, you can create contrast by inserting a rectangle back into the frame. It's the perfect companion to the Essential Sentiments stamp set but will work equally well with any number of other sets. This 3 piece set includes windows measuring 3 3/4" x 7/16", 2 3/4" x 7/16", 2" x 7/16". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Twice The Thanks Die by My Favorite Things
The Twice the Thanks Die-namics cuts the words thanks and thank you in an elegant and gorgeous thin script. Use this design with our Kind Thanks stamp set to create thoughtful and thankful projects! These dies are not intended to die cut the corresponding words in the stamp set but rather, to replace them as you build your thankful sentiments.

This 2 piece Die-namics includes: Thanks 3 1/8" x 1 1/4" and Thank You 3 5/8" x 1 1/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics A2 Stitched Rectangle STAX Set 1 Die by My Favorite Things
A2 Stitched Rectangle STAX Set 1 is an essential collection of rectangle dies sized to work with A2 cards. The largest die measures 4 1/8" x 5 3/8" resulting in a fine 1/16" border around your card perimeter. Use this set in conjunction with the A2 Rectangle STAX Sets 1 and 2 Die-namics and the A2 Stitched Rectangle STAX Set 2 for infinite layering possibilities. Our line of STAX provides maximum value and versatility. Nested dies in multiple sizes come on a magnetic sheet for easy storage. This 9 piece set includes rectangles measuring: 4 1/8" x 5 3/8", 3 11/16" x 4 15/16", 3 1/4" x 4 1/2", 2 13/16" x 4 1/8", 2 3/8" x 3 11/16", 2" x 3 1/4", 1 9/16" x 2 13/16", 1 1/8" x 2 3/8", 3/4" x 2". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics A2 Stitched Rectangle STAX Set 2 Die by My Favorite Things
A2 Stitched Rectangle STAX Set 2 is an essential collection of rectangle dies sized to work with A2 cards. The largest die measures 4" x 5 1/4" resulting in a fine 1/8" border around your card perimeter. Use this set in conjunction with the A2 Rectangle STAX Sets 1 and 2 Die-namics and the A2 Stitched Rectangle STAX Set 1 for infinite layering possibilities. Our line of STAX provides maximum value and versatility. Nested dies in multiple sizes come on a magnetic sheet for easy storage. This 9 piece set includes rectangles measuring: 4" x 5 1/4", 3 9/16" x 4 13/16", 3 1/8" x 4 3/8", 2 3/4" x 3 15/16", 2 5/16" x 3 9/16", 1 7/8" x 3 1/8", 1 7/16" x 2 11/16", 1" x 2 1/4"x 5/8" x 1 7/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Animal Farm Die by My Favorite Things
This Die-namics coordinates with the Animal Farm stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. This 14 piece set includes: Cow 1 7/8" x 1 5/8", Horse 1 7/8" x 1 3/4", Pigs (2) 1 1/2" x 1 1/4", 7/8" x 7/8", Sheep (2) 1 1/2" x 1 1/4", 1 1/8" x 7/8", Ducks (2) 5/8" x 3/4", 1/2" x 7/8", Sign 15/16" x 7/8", Carrot 1/4" x 1/2", Apple 3/8" x 3/8", Foliage (2) 5/16" x 9/16", 1/4" x 1/2". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics Animal Farm Fence Die by My Favorite Things
Environment-building for your farm animals and other pastoral scenes will be a breeze with this versatile fence design. Use the fence alone, or add additional fence posts for extra dimension. Snip your fence in half to add the optional gate element. This 3 piece set includes: Fence 6" x 5/8", Posts 1/8" x 5/8", Gate 5/8" x 5/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies.

See More Items Like This
 
Die-namics BB Party Like a Pirate Die by My Favorite Things
This Die-namics coordinates with the Party Like a Pirate stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die.

This 12 piece set includes: Pirates (3) 1 5/8" x 3 1/8", 2" x 2 1/4", 1 5/8" x 2 1/8", Boat 1 1/2" x 1 3/4", Island 7/8" x 1 1/4", Treasure chest 1" x 7/8", Parrot 1" x 1 1/8", Skull 1" x 7/8", Coins (2) 7/8" x 7/16", 5/8" x 7/16", Birds (2) 5/8" x 5/16", 1/2" x 1/4",

See More Items Like This
 
Die-namics Beach Bunnies Die by My Favorite Things
This Die-namics coordinates with the Beach Bunnies stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die. This 14 piece set includes: Bunnies (4) 1 3/4" x 2", 1 1/4" x 1 5/8", 1 1/2" x 2 1/8", 1 3/8" x 1 3/4", Huts (2) 9/16" x 1 1/16", 3/4" x 1 1/16", Clouds (3) 1 5/16" x 9/16", 1 1/8" x 9/16", 15/16" x 7/16", Bird 3/4" x 1/2", Cone 1/2" x 3/4", Shell 1/2" x 7/16", Heart 3/8" x 3/8", Star 3/8" x 3/8". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Beary Big Adventure Die by My Favorite Things
This Die-namics coordinates with the Beary Big Adventure stamp set for perfectly sized die cuts every time. It is open inside to allow you to stamp then cut OR cut then stamp. This feature makes the Die-namics lighter weight and allows for easier removal from the die.

This 11 piece set includes: Bear 2 1/8" x 2 1/2", Hills (2) 1 7/8" x 1 1/8", 1 1/4" x 3/4", Trees (2) 3/4" x 1 1/2", 3/4" x 1 7/8", Clouds/bushes (2) 1 1/4" x 3/4", Flowers (4) 5/8" x 5/8", 1/2" x 1/2", 3/8" x 3/8", 7/16" x 5/8".

See More Items Like This
 
Die-namics Beary Special Birthday Die by My Favorite Things
This Die-namics coordinates with the Beary Special Birthday stamp set for perfectly sized die cuts every time. The dies are open inside to allow you to stamp, then cut OR cut, then stamp. This feature keeps our Die-namics lightweight and allows for easy removal of the die cut from the die.

The Beary Special Birthday Die-namics includes: Bears (4) 2 1/8" x 1 15/16", 2 1/16" x 2 1/4", 2 11/16" x 2 1/4", 1 5/8" x 2 15/16", Balloons 1 13/16" x 2 3/4", Gifts 1" x 1", Party hat 1/2" x 3/4".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Big Thanks Die by My Favorite Things
Say THANKS in BIG, bold, beautiful fashion with this generously-sized greeting. Big Thanks measures 3 9/16" x 1 9/16".

See More Items Like This
 
Die-namics Birthday Present Die by My Favorite Things
This innovative Die-namics creates a dimensional accent perfect for cards, tags, and package decor. Use the emboss lines to guide your folding. The lid slides over the box base - tuck a fun surprise inside! This set includes a triangle element to create a tissue paper insert and a multi-layered ribbon to complete the look.

This 8 piece set includes: Present base 3" x 2 1/2", Present top 3 1/4" x 1", Tissue paper insert 2 1/8" x 1 1/4", Bow 1 3/4" x 1 3/4", Bow middle layer 1 3/4" x 5/8", Bow top layer 1 3/4" x 1/2", Knot 1/4", Straight ribbon 1/2" x 2 1/8", Assembled dimensions 2 1/4" wide x 2 1/8" tall x 3/16" deep.

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Blissful Blooms Die by My Favorite Things
This Die-namics coordinates with the Blissful Blooms stamp set for perfectly sized die cuts every time. This 28 piece set includes: Flowers measuring 3/4" x 5/8", 1/4" x 5/8", 5/8" (5), 3/4" (4), 1" (2), 1/2", 1" x 3/4", Foliage measuring 3/4", 1/4", 1/2" x 1", 1 1/2", 1", 5/8" x 7/8" (3), 1/4" x 7/8", 1" x 7/8", 1 1/8" x 1 3/8" (2), 3/4" x 1". MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Blueprints 21 Die by My Favorite Things
The Blueprints line of Die-namics is designed to take the guesswork out of starting your next card project. Whether you're short on time or simply need a jumpstart, Blueprints is your answer. Each Blueprints set includes a digital design plan for you to follow or, use the included elements to become your own architect and create something completely new and unique. All of our Blueprints coordinate so that you can mix and match elements from different sets. Each Blueprints set comes to you with smaller elements nested within larger to give you more value for your money. Interior elements are deburred and detabbed for your convenience - these dies are ready to use right out of the package. A magnetic backing is also included with each Blueprints set to provide easy and neat storage.

We've rounded up an incredibly useful collection of circles, semi-circles, pierce holes, stitch holes, and circular peek-a-boo-borders in this decidedly circle-focused set The clever Blueprints 21 includes a variety of elements and accents designed to lend graceful curves and detailing to all of your cards and paper crafts. An arc of stitchable dots matches the curve of one of the semi-circles while an arc of peek-a-boo circles is a perfect fit to the largest semi-circle. A trio of pierced circles in graduating sizes provides for perfect layering options. Two sentiment strips, a pierced panel, and a versatile border round this set out. This 12 piece set includes the following elements: Pierced rectangle 4" x 5 1/4", Peek-a-boo border 3 5/8" with circles measuring 1/4", Sentiment strips (2) 2 3/4" x 1/2", Semi-circle A 4" x 2", Semi-circle B 2 3/4" x 1 1/8", Semi-circle C 2 1/4" x 1 3/8", Stitchable arc 2 1/2" x 1 3/8", Peek-a-boo arc 2" x 1/2", Pierced circle A 1", Pierced circle B 3/4", Pierced circle C 1/2".

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 
Die-namics Bottlecaps Die by My Favorite Things
Use the Bottlecaps Die-namics to easily create a row of five peek-a-boo holes in your card front or to create die-cut bottlecaps with perfectly sized interior circles for layering. Combine with the Bottlecap Letters and Numbers to spell out a simple greeting or sentiment.

This 2 piece set coordinates with the Soda Pop Bottles Die-namics, Bottlecap Letters Die-namics, Bottlecap Numbers Die-namics, and Soda Pop stamp set and includes: Bottlecaps 4 7/8" x 7/8" (individual bottlecaps 7/8"), Circles 4 3/4" x 3/4" (individual circles 3/4").

MFT Die-namics dies are our very own EXCLUSIVE, American made line of steel dies. Die-namics dies work with most tabletop die cutting machines such as the Big Shot & Cuttlebug.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8

If you don't see what you're looking for, make a Special Request and let us find it for you!

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!