Impression Obsession Alphabet Plain Uppercase Die Set

 Click Picture to Zoom

Impression Obsession Alphabet Plain Uppercase Die Set

Impression Obsession DIE158-H

$7.50 + $2.99 shipping within the U.S.

(2 reviews)

Size: 1" x 4 3/4"

In Stock. Usually ships in 1-2 business days.

Item: DIE158-H - Type: Craft Dies.
This is a single die that cuts all 26 letters. They measure .4 inches tall. These dies are compatible with most tabletop die cut machines.
123Stitch.com ships via the U.S. Postal Service to anywhere in the world. Orders to the U.S. typically arrive 3-5 days after we ship.

Shipping charges are shown in your shopping cart every time you add an item.

If you are not completely satisfied with any of our products, you can return it to us within 30 days for a full refund.

Reviews From Customers Who Purchased This Item

on 12/24/2015 - Love it
This is the best alphabet set I've bought. The letters cut perfectly and just fall out of the die with just a slight tap. They are the perfect size for my cards.

on 06/20/2015 - My new go-to alphabet die
Love this die! It is especially useful when making cards since the letters are thinner. Obviously the lower-case alphabet coordinating die is a must-have as well. The cuts are smooth, and most of the letters pop right out of the die with a gentle tap. For the few remaining in the die, a toothpick inserted in the little holes on the back of the die does the trick.


More Items Like Impression Obsession Alphabet Plain Uppercase Die Set
Go to Page: 1  2  3  4  5  6  7  8  9  10  

Impression Obsession Car and Camper Die Set by Impression Obsession
This is a set of three dies. The board is 1/2 x 1-1/2 inch, the car is 1 x 2 inches, and the camper is 1-3/8 x 2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Fir Trees Die Set by Impression Obsession
The trees are 1-3/4", 2-1/4", and 3-3/4" tall. These dies are compatible with most tabletop die cut machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Mini Nautical Die Set by Impression Obsession
This is a set of 8 dies. The anchor, life preserver, and wheel are around 1 inch, the lighthouse is 1-3/8 x 1-3/4 inches, and the fish are around 1/2 inch. These are US-made steel dies compatible with most table-top die cutting machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Fence Trio Die Set by Impression Obsession
This is a set of three separate dies wired together, they can be separated by snipping the wires. Each section is around 1-3/4" long and the long posts are 1-3/4" tall. This die set is designs by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Plane with Banner Die Set by Impression Obsession
This is a set of 2 dies. The plane is 3/4 x 1-1/2 inches. The banner is 1/2 x 3-1/4. These are US-made steel dies compatible with most table-top die cutting machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Small Snowflake Die Set by Impression Obsession
The snowflakes range from 1/2" to 1-1/2". These dies are compatible with most tabletop die cut machines.

(11 reviews)
See More Items Like This
 
Impression Obsession Pine Sprig Die Set by Impression Obsession
Craft die featuring a pine sprig. This is a set of 6 dies. Each sprig measures approximately 1 inch. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Classic Truck Die Set by Impression Obsession
This is a set of 6 dies. The truck is 1-1/8" x 3-3/8".

(3 reviews)
See More Items Like This
 
Impression Obsession Garden Animal Die Set by Impression Obsession
Features rabbits and squirrels. This is a single die with all 7 shapes, it coordinates with a stamp that stamps all of the pieces at once and an outline that the die fits into for easy alignment. The animals measure between .75 and 1 inch. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Twig Wreath Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The wreath is measures 3-1/4 "x 3-1/2" and the pine needle is 1" long, the holly is 1" and the berries are 1/8". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(2 reviews)
See More Items Like This
 
Impression Obsession Fancy Butterfly Die Set by Impression Obsession
Each butterfly measures 1-3/4" x 3". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Small Bird Die Set by Impression Obsession
This is a set of ten separate dies wired together, they can be separated by snipping the wires. The birds all measure between .25 and .5 inches. These dies are compatible with most tabletop die cut machines.

(10 reviews)
See More Items Like This
 
Impression Obsession Deer Trio Die Set by Impression Obsession
The group of three is approximately 3" x 3". These dies are compatible with most tabletop die cut machines.

(6 reviews)
See More Items Like This
 
Impression Obsession Woody with Surfboard Die Set by Impression Obsession
This is a set of two dies. The surfboard is 2-5/8 inches long and the car is 3-1/4 inches long. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Beach Chairs Die Set by Impression Obsession
This is a set of 2 dies. The chair is 1-1/2 x 2 inches. These are US-made steel dies compatible with most table-top die cutting machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Leaves & Stems Die Set by Impression Obsession
This is a set of 14 separate dies wired together, they can be separated by snipping the wires. The single leaves measure .5 x 1.125 inches and the stems with leaves measure .5 x 1.125 inches. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Sea Birds Die Set by Impression Obsession
The largest bird is 1-3/8" x 2" and the smallest is 3/8" x 5/8". These dies are compatible with most tabletop die cut machines.

(7 reviews)
See More Items Like This
 
Impression Obsession Small Poinsettia Die Set by Impression Obsession
Christmas themed craft die featuring poinsettia flowers. This is a set of 3 dies. They measure 1, 1-1/4, and 1-1/2 inches in diameter. These dies are compatible with most tabletop die cut machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Layered Floral Die Set by Impression Obsession
The flowers are around 1/2"-3/4" and the leaves are 3/8" x 5/8". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Shore Birds Die Set by Impression Obsession
This is a set of six dies. The small shore birds are 5/8 inch tall and the herons are 2-1/8 inches tall. These are US-made steel dies compatible with most table-top die cutting machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Large Poinsettia Die Set by Impression Obsession
Christmas themed craft die featuring poinsettia flowers. This is a set of 3 dies. They measure 1-3/4, 2-1/4, and 2-3/4 inches in diameter. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Border Duo 2 Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The borders are both 7-1/2" long and the thicker one is 1" wide. This die set is designed by Dina Kowal, dkdesigns. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Mini Shell Die Set by Impression Obsession
This is a set of seven dies. The seashells are around 5/8 inch, the starfish is 1 inch. These are US-made steel dies compatible with most table-top die cutting machines.

(8 reviews)
See More Items Like This
 
Impression Obsession Mason Jar Die Set by Impression Obsession
This is a set of 3 separate dies wired together, they can be separated by snipping the wires. The jar measures 1.5 inches and 2.5 inches. These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Small Grass Die Set by Impression Obsession
This is a set of 3 dies. The grass is 1-3/4 tall. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Coffee Set Die by Impression Obsession
This is a set of 4 dies. The pot is 2-1/8" x 2-1/2", the grinder is 1-3/4" x 2", the cup is 1-1/8" x 1-1/2", and the beans are 1/4" x 3/8". These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Rabbit Die Set by Impression Obsession
This is a set of four separate dies wired together, they can be separated by snipping the wires. The rabbits measure between .75 x 1 and 1.25 x 1.25 inches. These dies are compatible with most tabletop die cut machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Clothesline Die Set by Impression Obsession
This is a set of 16 separate dies wired together, they can be separated by snipping the wires. The clothing measures around 1 x 1.5 inches to 1.25 x 1.5 inches. This die set coordinates with CL539 Clothesline Set. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Bunny Die Set by Impression Obsession
The leaping bunny measures 1-1/2" x 1-1/2", the tall bunny measures 1" x 3/4", and the sitting bunny measures 1-1/4" x 1-1/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(3 reviews)
See More Items Like This
 
Impression Obsession Tulip Die Set by Impression Obsession
This is a set of ten separate dies wired together, they can be separated by snipping the wires. The tulips measure .25 x 1 inch. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Puppy Die Set by Impression Obsession
This is a set of five separate dog dies wired together, they can be separated by snipping the wires. The largest puppy measures 1.25 x 1.5 inches and the smallest is .75 x 1 inch. These dies are compatible with most tabletop die cut machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Bicycle Die Set by Impression Obsession
This is a set of seven separate dies wired together, they can be separated by snipping the wires. The bike measures 2.375 x 3.75 inches and the smaller pieces are around .75 x 1 inch. It coordinates with CL255 Riding Pretty clear set. Designed by Alesa Baker Designs. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Halloween Die Set by Impression Obsession
The ghost is 1", the pumpkin is 1" x 1-1/8", the house is 1-1/2", the witch is 1-1/2". These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Cupcake Die Set by Impression Obsession
The main cupcake is 1-1/2". These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Heart Set Die by Impression Obsession
Impression Obsession die featuring a set of hearts. These dies are compatible with most tabletop die cut machines. This is a set of five separate dies wired together, they can be separated by snipping the wires. The largest heart measures 1.75 x 2 inches and the smallest heart measures .5 x .625 inches.

See More Items Like This
 

Go to Page: 1  2  3  4  5  6  7  8  9  10  

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!