Large Glasses Craft Die

 Click Picture to Zoom

Large Glasses Craft Die

Impression Obsession DIE481-M

$10.00 + $3.29 shipping within the U.S.

Usually ships in 14-21 days.

Item: DIE481-M - Type: Craft Dies.
Craft die from Impression Obsession featuring two pairs of glasses. This is a set of 2 dies. Each pair of glasses is approximately 3 inches wide.
123Stitch.com ships via the U.S. Postal Service to anywhere in the world. Orders to the U.S. typically arrive 3-5 days after we ship.

Shipping charges are shown in your shopping cart every time you add an item.

If you are not completely satisfied with any of our products, you can return it to us within 30 days for a full refund.

More Items Like Large Glasses Craft Die
Go to Page: 1  2  

Impression Obsession Sunglasses Die Set by Impression Obsession
The third pair down measures 1/2" x 1-1/4" and the fourth pair is 3/4" x 1-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Owl Die by Impression Obsession
Impression Obsession graduation themed die featuring an owl with a mortarboard. This is a set of 11 dies wired together that can be separated by snipping the wires. The owl body measures 1-1/2 x 2 inches, the glasses measure 1/2 x 1-3/8 inches, the eyes are 1/2 inch. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Retro Masculine Die by Impression Obsession
This is a set of 14 dies. The hats are approximately 1-1/4" wide, the tie s 1-7/8" long, the largest mustache is 1-1/4" wide, and the smallest mustache is 5/8" wide." These are US-made steel dies compatible with most table-top die cutting machines.

(3 reviews)
See More Items Like This
 
Impression Obsession Large Candle Die by Impression Obsession
This large candle craft die from Impression Obsession is a set of 3 dies. The candle itself is 3-1/4 inches tall and 5/8 inch wide and the flame is 3/4 inch. tall. Compatible with most table-top die cutting machines.

See More Items Like This
 
Lg. Ornate Flourish Craft Die by Impression Obsession
Craft die from Impression Obsession featuring a large ornate flourish. This is a single die measuring 2-1/2 x 5-1/4 inches.

See More Items Like This
 
Impression Obsession Large Leaf Stem Die by Impression Obsession
Craft die featuring a leaf. This die measures 2-1/4 x 3-3/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Front Door Craft Die by Impression Obsession
Craft die from Impression Obsession featuring a large door. This is a single die measuring 2-5/8 x 4-5/8 inches.

See More Items Like This
 
Tree Window Scene Craft Die by Impression Obsession
Features large tree framed through a window. This is a single die measuring 3-3/4 x 5 inches.

See More Items Like This
 
Impression Obsession Large Cabin Die by Impression Obsession
Craft die featuring a country cabin. This is a set of 7 dies. The assembled cabin measures 3 x 3-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Geometric Cutout 2 Craft Die by Impression Obsession
Features a large, geometric ring. This is a single die measuring 3 inches in diameter.

See More Items Like This
 
Impression Obsession Large Poinsettia Die Set by Impression Obsession
Christmas themed craft die featuring poinsettia flowers. This is a set of 3 dies. They measure 1-3/4, 2-1/4, and 2-3/4 inches in diameter. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Fence Die by Impression Obsession
This is a single die measuring 2.875 x 3.5 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Feather Die by Impression Obsession
This is a single die measuring 2 x 4.75 inches. Designed by Dina Kowal, dkdesigns. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Large Snowflake Die by Impression Obsession
The die is 3-1/2" x 4-1/8". These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Large Window with Box Die by Impression Obsession
The window is 3-1/2" x 4". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Spiral Flowers Large Die by Impression Obsession
Impression Obsession die featuring flowers. This is a set of 5 dies measuring around 1-1/2 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Large Bird on Branch Die by Impression Obsession
This is a single die measuring 2.5 x 3.875 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Square Shaker Frame Die by Impression Obsession
The large frame is 3-3/4" square and the inner opening is 2-5/8" square. The small frame is 2-1/2" square with an 1-3/4" opening. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Large Candle Block Die and Stamp by Impression Obsession
This is a set including one US-made steel die compatible with most table-top die cutting machines and one red rubber stamp. The stamp has a rectangular border around it so that it stamps the images AND a border around them. The border is the same size as the die. To cut out all the stamped images at once, you simply place the die within the border, and run it through your machine.

See More Items Like This
 
Impression Obsession Circle Shaker Frame Die by Impression Obsession
The large frame is 4" in diameter and the inner opening is 3". The small frame is 2-7/8" outside diameter and the inner opening is 2". This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Large Bow Die by Impression Obsession
The bow measures 2-1/4" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(7 reviews)
See More Items Like This
 
Impression Obsession Snow Globe Die by Impression Obsession
The globe is 3" in diameter and is designed to fit our large circle shaker pouch. The base is 1-1/2" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(3 reviews)
See More Items Like This
 
Impression Obsession Oak Leaves and Rake Die by Impression Obsession
This is a set of 3 Autumn themed dies. The leaves are in two clusters, the large ones measure 5/8" across and the small ones measure 3/8" across. The rake is 1" x 2-3/4". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Farm Girl Die by Impression Obsession
Impression Obsession die featuring a farm girl, a fence, a chicken, and a rooster. This is a set of 6 dies. The girl measures 1-3/8 x 2-1/8. The small chicken and ducks measure around 5/8 inch. The large rooster and duck measure around 7/8 inch. The fence is 1 x 2-1/2 inches.

These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Flip Flops Die Set by Impression Obsession
This is a set of 8 dies. The small flip flops are 1 inch tall and the large flip flops are 2 inches tall. These are US-made steel dies compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Merry Christmas Craft Die by Impression Obsession
Craft die from Impression Obsession featuring the sentiment "Merry Christmas". This is a single die measuring 1-3/4 x 3-3/4 inches.

See More Items Like This
 
Impression Obsession Candle Border Die by Impression Obsession
Craft die featuring a border of candles. This is an edger die. They have no bottom edge so you can make the layer however tall you want by using a paper trimmer. The die measures 1 x 5-3/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Sunburst Background Die by Impression Obsession
Craft die featuring the sun and rays of sunlight. This die measures 3-3/4 x 5 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Joy Craft Die by Impression Obsession
Craft die from Impression Obsession featuring the sentiment "joy". This is a single die measuring 1-3/4 x 2-1/2 inches.

See More Items Like This
 
Split Tree Craft Die by Impression Obsession
Craft die from Impression Obsession featuring a tree split in half. This is a set of 2 dies. Each one measures 2 x 4 inches. They can be used separately on the edge of a card like a gatefold card or together to make a single die cut tree.

See More Items Like This
 
Impression Obsession Cardinals Die by Impression Obsession
Craft die featuring birds. This is a set of 12 dies. They measure from 1/4 to 3/4 inches. These dies are compatible with most tabletop die cut machines.

(4 reviews)
See More Items Like This
 
Impression Obsession Balloons Die by Impression Obsession
Party themed craft die featuring balloons. This is a set of 6 dies. The ballons measure from 5/8 x 7/8 inch to 1-3/4 x 2-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Foliage Die by Impression Obsession
Craft die featuring leaves. This is a set of 4 dies. They measure from 2-1/4 x 2-1/4 inches down to 5/8 x 1 inch. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Gift Border Christmas Die by Impression Obsession
Christmas themed craft die featuring a border of presents. This is an edger die. They have no bottom edge so you can make the layer however tall you want by using a paper trimmer. The die measures 1-3/4 x 5-3/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 

Go to Page: 1  2  

Don't miss any of our special sales or offers! Sign up for our Weekly Ad today!