Impression Obsession Dies


Search these 534 items for
Impression Obsession Spiral Daisy Die by Impression Obsession
The daisy measures 2-1/2" x 2-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Spiral Rose Die by Impression Obsession
Craft die featuring rose flowers. This is a set of 6 dies. Each one measures 1 inch cut and approximately 1/2 inch when rolled. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Square Cutout Border Die by Impression Obsession
This is a single die measuring 1 x 5.25. It does not have an outer border so it can be used to cut the pattern on a layer or a card front. It can be made into a border strip by trimming the edges of the die cut with a paper trimmer. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Square Shaker Frame Die by Impression Obsession
The large frame is 3-3/4" square and the inner opening is 2-5/8" square. The small frame is 2-1/2" square with an 1-3/4" opening. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Stencil Alphabet Die Set by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Stork Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The stork measures 2.5 x 3 inches and the bundle measures 1 x 1.625 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Sun and Moon Die Set by Impression Obsession
This is a set of five separate dies wired together, they can be separated by snipping the wires. The sun measures 1.625 inches in diameter, the moon is 1.25 inches tall and the stars are .25 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Sun Sand Sea Die by Impression Obsession
Craft die from Impression Obsession featuring the beach sentiment "sun sand sea". This is a single die measuring 2-1/2 x 3 inches.

See More Items Like This
 
Impression Obsession Swirl Tree Die by Impression Obsession
The tree measures 3-1/2" x 3-3/4". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Teacup Die by Impression Obsession
Craft die from Impression Obsession featuring a small teacup. This is a single die measuring 1-1/2 x 3 inches.

See More Items Like This
 
Impression Obsession Thanks Die by Impression Obsession
This is a single die measuring 1 x 3-1/2 inches. Features the sentiment "Thanks". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Tree Landscape Layers Die by Impression Obsession
Craft die featuring a landscape with trees. This is a set of 3 edger dies. They have no bottom edge so you can make the layer however tall you want by using a paper trimmer. They are 6 inches wide. The tallest tree is 2 inches tall. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Tree Row Die by Impression Obsession
Craft die featuring a row of trees. This die measures 2 x 6 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Very Merry Christmas Die by Impression Obsession
Christmas themed craft die featuring the sentiment "A Very Merry Christmas". This is a set of 5 dies. The star measures 5/8 inch and the tree assembled measures 3-1/4 x 3-1/4 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Vines Die by Impression Obsession
Craft die from Impression Obsession featuring vines. This is a single die measuring 2-3/4 x 3 inches.

(1 review)
See More Items Like This
 
Impression Obsession Winding Road or Stream Die by Impression Obsession
This is a single die measuring 2-1/2 x 2-7/8 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Window with Shutter Die by Impression Obsession
The window is 2" x 2-7/8". These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Wishes Die by Impression Obsession
This is a single die measuring 1-1/4 x 3-1/2 inches. Features the sentiment "Wishes". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Yeah Die by Impression Obsession
Impression Obsession die featuring the word "Yeah". This die measures 1 x 1-1/4 inches. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession You and Me Die by Impression Obsession
Love themed Impression Obsession die featuring the sentiment "You & Me". US-made steel die compatible with most table-top die cutting machines. This is a single die measuring approximately 1-1/2 x 1-3/4 inches.

See More Items Like This
 
Layered Tree Craft Die by Impression Obsession
Features a Christmas themed tree. This is a single die measuring 3 x 3-1/4 inches.

See More Items Like This
 
Mitten Craft Die by Impression Obsession
Features a single winter mitten. This is a single die measuring 2-1/2 x 3-1/8 inches.

(1 review)
See More Items Like This
 
Patchwork Holly Craft Die by Impression Obsession
Features some Christmas holly. This is a set of 6 dies. The leaves are 3/4 x 1-1/8 inches.

See More Items Like This
 
Patchwork Turkey Craft Die by Impression Obsession
Features a Thanksgiving turkey. This is a set of 10 dies. The assembled turkey measures approximately 2-1/2 inches.

See More Items Like This
 
Small Flourish Background Craft Die by Impression Obsession
Features a background of flourish vines. This is a single die measuring 3-3/4 x 5 inches.

See More Items Like This
 
Tree Window Scene Craft Die by Impression Obsession
Features large tree framed through a window. This is a single die measuring 3-3/4 x 5 inches.

See More Items Like This
 
Wreath Builder Craft Die by Impression Obsession
Features the components to build a Christmas themed wreath. This is a set of 9 dies. The wreath base measures 1-5/8 inches in diameter and each branch piece is approximately 5/8 x 1-1/4 inches.

See More Items Like This
 
Zombie Edger Craft Die by Impression Obsession
Features Halloween themed zombie hands. This is a single die measuring 1-3/4 x 5-1/2 inches. Because this is an edger die, it cuts the edge of a piece of paper. You can make the border as thick as you want because it doesn't cut the other side."

See More Items Like This
 
Chevron Adapt-a-Background Craft Die by Impression Obsession
Features a background of squiggly chevrons. This is a single die measuring 3-3/4 x 5 inches.

See More Items Like This
 
Eye Cutouts Craft Die by Impression Obsession
Halloween themed Craft die from Impression Obsession featuring four pairs of staring eyes. This is a set of 4 dies. Each pair of eyes is wired together. The sizes are as follows: 1/4 x 1 inch, 3/8 x 1-1/2 inches, 1/2 x 2 inches, and 5/8 x 2-1/2 inches. They are cutout dies so the eyes can be repeated on a card front or layer."

See More Items Like This
 
Floral Background Craft Die by Impression Obsession
Features a background of flowers and flower petals. This is a single die measuring 3-3/4 x 5 inches.

See More Items Like This
 
Geometric Cutout 2 Craft Die by Impression Obsession
Features a large, geometric ring. This is a single die measuring 3 inches in diameter.

See More Items Like This
 
Impression Obsession All-in-One Frames - Squares Die by Impression Obsession
Impression Obsession die featuring squares. This die measures 4 x 4 inches and cuts out multiple nesting frames at once. These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Arch and Trellis Die by Impression Obsession
The arch measures 2-1/2" x 3-3/4" and the trellis is 1-3/4" x 3-1/2". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Baby Die Set by Impression Obsession
Featuring a baby pacifier, bib, onesie, and stroller. This is a set of 4 dies. The onesie and the carriage measure 1-1/2 inches tall, the pacifier measures 1-1/4 inches, and the bib is 1-3/4 inches tall.

Compatible with most table-top die cutting machines.

(1 review)
See More Items Like This
 
Impression Obsession Balloons Die by Impression Obsession
Party themed craft die featuring balloons. This is a set of 6 dies. The ballons measure from 5/8 x 7/8 inch to 1-3/4 x 2-1/2 inches. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Bare Christmas Tree Die by Impression Obsession
The tree is 2-1/2" x 4". These dies are compatible with most tabletop die cut machines.

(1 review)
See More Items Like This
 
Impression Obsession Barn Die by Impression Obsession
This is a set of 8 dies. The barn assembled measures 2-1/2 x 2-3/4 and the silo measures 3 inches tall. These dies are compatible with most tabletop die cut machines.

See More Items Like This
 
Impression Obsession Beary Sweet Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a set of 16 dies that coordinate with a clear stamp set CL744. The balloon measures 7/8 x 3 inches and the bear measures 1-3/4 x 2-1/2 inches.

See More Items Like This
 
Impression Obsession Border Duo 2 Die Set by Impression Obsession
This is a set of two separate dies wired together, they can be separated by snipping the wires. The borders are both 7-1/2" long and the thicker one is 1" wide. This die set is designed by Dina Kowal, dkdesigns. This die is compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

(1 review)
See More Items Like This
 
Impression Obsession Bunch of Blossoms Die Set by Impression Obsession
This is a set of six separate dies wired together, they can be separated by snipping the wires. They measures around 1 inch in diameter. This die set coordinates with clear set CS540 Bunch of Blossoms. These dies are compatible with most tabletop die cut machines.

(2 reviews)
See More Items Like This
 
Impression Obsession Business Card Holder Die by Impression Obsession
This die folds to make a business card holder sized to fit standard 2 x 3.5 inch business cards. Add decorative layers with item DIE433-Z, Business Card Layers.

See More Items Like This
 
Impression Obsession Business Card Layers Die by Impression Obsession
Use these dies to add decorative layers to the DIE432-UU Business Card Holder.

See More Items Like This
 
Impression Obsession Butterfly 1 Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a single die measuring 2-5/8 x 4-1/8 inches.

See More Items Like This
 
Impression Obsession Butterfly 3 Die by Impression Obsession
These are US-made steel dies compatible with most table-top die cutting machines. This is a single die measuring 2-3/4 x 3-3/8 inches.

See More Items Like This
 
Impression Obsession By the Sea Die by Impression Obsession
Craft die from Impression Obsession featuring ocean waves, seagulls, sea shells, and more!

See More Items Like This
 
Impression Obsession Cake Die Set by Impression Obsession
The cake measures 1-1/2" x 1-1/2" and the candle is 1/4" x 1". These dies are compatible with most tabletop die cut machines. Additional shims may be necessary and some machines handle the detail level better than others.

See More Items Like This
 
Impression Obsession Candle Christmas Die by Impression Obsession
This is a set of 3 dies, the base is 5/8" x 1-1/4", the candle is 1/2" x 1-1/2", and the flame is 3/8" x 5/8". These are US-made steel dies compatible with most table-top die cutting machines.

See More Items Like This
 
Impression Obsession Candy Corn Block Die and Stamp by Impression Obsession
This is a set including one US-made steel die compatible with most table-top die cutting machines and one red rubber stamp. The stamp has a rectangular border around it so that it stamps the images AND a border around them. The border is the same size as the die. To cut out all the stamped images at once, you simply place the die within the border, and run it through your machine.

See More Items Like This
 
Impression Obsession Christmas Lights Die by Impression Obsession
The light strand is 1/2" x 5-3/4" and the lights are 1/4" x 3/8" and 3/8" x 5/8". These dies are compatible with most tabletop die cut machines.

See More Items Like This
 

Go to Page: 1 2 3 4 5 6 7 8 9 10 11

If you don't see what you're looking for, make a Special Request and let us find it for you!