from United States on 02/18/2014 - Perfect for paper I found these clamps to work great when stitching on perforated paper. I was even able to use them with 12 inch American Dream side extender bars in place of the Dutch Treat frame.
F.A Edmunds' Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need. Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery, the split rail dowels allow easy insertion of your work. The advancing of your pattern "just keeps rolling along", while the 4-way side tension bars keep your work area taut.
Edmunds-Stitcher's Wonder! Floor Stand Scroll Frame. Perfect for needlepoint cross stitch, crewel, embroidery and beading! This adjustable floor standing scroll frame is a combination of the 12x24 inch split rail scroll frame with the universal craft stand. This hands-free needlework frame fits every stitchers needs. This frame allows complete access to your work by tilting up, down and rotating a full 360 degrees. With easy turn knobs, it adjusts from 16 to 45 inches tall in order to locate the most comfortable working position. By just loosening two knobs it fold down to 16 inches for storage. This package contains one 9x24 inch Stitcher's Wonder! Floor Stand Scroll Frame. Made in USA
The Edmunds Universal Craft Stand (#6111) is perfect for many types of craft projects. Constructed from durable American hardwood, the 37.5" stand holds hoops, stretcher bars and scroll frames of all types and sizes. The stand easily adjusts for height, angle and right or left hand use. The Universal Craft Stand allows you to work comfortably with both hands for better stitch control. (Scroll Frame Not Included).
The Adjustable Lap and Table Stand comes complete with an 8.5"x24" rotating split rail scroll frame which will accomodate fabrics up to 21" wide. The convenient lap stand has three height settings that allow you to work with both hands free for better stitch control. This frame was designed to be used on top of a table, relaxing in bed, or while sitting in your favorite chair.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
8.5" x 18" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame. Lightweight and portable these frames keep your work taut and straight as you stitch.
8.5" x 24" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
6"x12" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
Two 8 1/2" Replacement Clamps for 11" Frame Sides. Replacement clamps to hold the fabric onto the frame. For use with the 11"x11" or 11"x17" Q-Snap frames.
Two 14 1/2" Replacement Clamps for 17" Frame Sides. Replacement clamps to hold the fabric onto the frame. For use with the 11"x17" or 17"x17" Q-Snap frame.
Two 17 1/2" Replacement Clamps for 20" Extension Frame Sides. Replacement clamps hold the fabric onto the Q-Snap frame. For use with the 20" Extension Frame
Use this new hands-free lap stand in your favorite chair, the car, plane or train. The flexible side stands are easily removed and fold flat for storage. This package contains one Stitch N'Scroll lap stand. Assembled size: 8.5x18 inches.
Hook & Loop No Basting System For SCROLL RODS, 3 Yards, 1 inch wide. Hate to baste? Then the Hook & Loop No Basting System is the ticket! Attach your fabric instantly to the scroll rods, remove it, and reattach it in the blink of an eye. Enables you to maintain the tension needed to produce even stitches. 1" wide for easy attaching.
There are two parts to the system which is made of a special Velcro. Each has a sticky back. The first part (for scroll rods) permanently attaches to the scroll rods and is reusable over and over. You can even retrofit your existing rods as it is easy to apply. The second part (for fabric) permanently attaches to the project and is cut off after using. When you start a new project, you only replace the second part which goes on the fabric.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
18" Stitchers Ratchet Frame is a 2-rail stitching system for use in Cross Stitch, Needlepoint and Embroidery. No Basting, Tacking or Tools Required! Fabric moves back and forth on ratcheting "S" shaped dowels. Smooth reversible ratchets advance your fabric effortlessly. Our dowels are fabricated using the "Yin/Yan" concept for easy fabric retention without basting. Very lightweight and portable.
This Original Base adjusts to accommodate a scroll frame, PVC frame or hoop which is 13" to 22" wide. This frame is complete with a 16" scroll frame. It folds completely flat without disassembly for storage. Base and scroll frame are made of hardwoods and are unfinished and sanded. Scroll frame has unfinished 3/4" diameter dowels with 1-1/2" cotton twill tape.
4.5" x 9" Mini Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
Like its big sister, The Lap Stitch Little Doodler Frame side bars are evenly balanced so the frame can be turned and the fabric angle remains the same. The Lap Stitch Little Doodler comes with 9" and 12" dowels and offers a 7" dowel to dowel working area.
The Doodler frame provides a portable, hands-free solution for all types of needlework. What makes the Doodler special is the evenly balanced design of the side bars, allowing the stitcher to turn the frame around and have it remain evenly balanced. This frame is perfect for the stitcher who loves to do needlepoint, bargello, crewel- embroidery, or any other type of needlework that requires the project to be turned around regularly. The doodler includes 12", 15", and 18" dowels. The working window is 10 inches dowel to dowel.
The smaller of the two Z frames. The Z arm allows for complete open sided stitching. Available with a clamp that will hold either Q-Snaps, stretcher bars or any brand scroll frames. This unique "Z" design allows the stitcher to adjust the height of the frame from 4" to 10" depending on their preference. Like the Original Frame series from K's the Z series is completely collapsible to lay flat for storage without disassembly. The base and clamp are solid oak with an antique golden oak oil rubbed finish. The Baby Z is 11-1/2"x5-1/2" when open.