Lap-Stitch Dutch Treat Frame for Perforated Paper

Lap-Stitch Dutch Treat Frame for Perforated Paper

 Click Picture to Zoom



$62.00  $55.79

Out of Stock
Would you like us to email you when this item is back in stock? Your email address will ONLY be used to notify you about this item.

(5 reviews)

Item: 10-1487
Type: Stitching Frames Hoops and Stands
Designer: Doodlin Around Design

The Dutch Treat frame is a practical working frame for perforated paper. It is designed to be used on the lap or table so that projects will be kept clean and free of kinks. The only thing you have to hold is your needle, because the frame sets on your thighs, a table, or propped on the arm of your chair. One hand goes behind the paper or under the bottom clamp and the other hand stays on top of the paper. All you need to do is pass the needle back and forth. The set contains the oak side bars and a set of knobs (dowels sold separately - 8", 15", or 24").

Reviews From Customers Who Purchased This Item

from United States on 10/11/2018 - A quality stand for stitching perforated paper!
What a wonderfully made lap stand! Very comfortable to use. Sturdy but not heavy. Now my hands dont cramp when stitching Mill Hill Santas Or Brookes Books characters! There are no wing nuts to pinch my fingers ! My perforated paper no longer gets bent out of shape or torn. Love it!!! Would recommend it to anyone who wants to stitch on perforated paper. Great value for the money.

from United States on 12/11/2016 - Much happier stitching!
I love to stitch! I have used perforated paper for a while now. My concern is the final condition of the paper. Now I can keep the paper in good condition until the end of the project, and the arthritis in my hands doesn't act up nearly as much!

from United States on 10/03/2016 - Great product!
As I have tried to work with perforated paper in the past and my perfectionist side has bulked at the abuse the paper takes from too much handling, I would like to say that the Dutch Treat Frame has been a wonderful addition to my collection of lap frames. If you prefer to work with both hands, this product is a must!

from United States on 02/17/2015 - Love this
I do a lot of the Mill Hill cross stitch bead kits using perforated paper. Usually my paper is a little worn by the time I am done.I was concerned, given the price that it would not work for me. I took my chances and I love using this. The only thing is, I do have to take the paper out of the lap stitch frame to finish all the edges of the project. This isn't a design issue of the frame. It is that the kit provides a smaller piece of paper 8X8 so the edge of the design is too close to the dowel clamp. I bought the 8" dowel and plan to get the next size up to see if it will give me more room to work the side edges of the project, without having to remove it from the frame.The weight is fine for me and it has a great hold on the paper.I give it 5 stars.PS. It would be nice it the item was sold with at least one of the dowel clamps. A faithful customer

from United States on 09/22/2013 - best for paper
Don't know how I stitched paper without this. Definitely worth the price.


More Items Like Lap-Stitch Dutch Treat Frame for Perforated Paper
EDM-2800 Split Rail Scroll Frame Set
by F.A. Edmunds
$33.29 $31.83
  Add to Wish List
F.A Edmunds' Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need. Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery, the split rail dowels allow easy insertion of your work. The advancing of your pattern "just keeps rolling along", while the 4-way side tension bars keep your work area taut.
EDM-6115 Stitcher's Wonder! Floor Stand Scroll Frame
by F.A. Edmunds
$66.99 $54.99
  Add to Wish List
Edmunds-Stitcher's Wonder! Floor Stand Scroll Frame. Perfect for needlepoint cross stitch, crewel, embroidery and beading! This adjustable floor standing scroll frame is a combination of the 12x24 inch split rail scroll frame with the universal craft stand. This hands-free needlework frame fits every stitchers needs. This frame allows complete access to your work by tilting up, down and rotating a full 360 degrees. With easy turn knobs, it adjusts from 16 to 45 inches tall in order to locate the most comfortable working position. By just loosening two knobs it fold down to 16 inches for storage. This package contains one 9x24 inch Stitcher's Wonder! Floor Stand Scroll Frame. Made in USA
EDM-6111 Wood Universal Craft Stand (Scroll Frame Not Included)
by F.A. Edmunds
$41.79 $34.99
  Add to Wish List
The Edmunds Universal Craft Stand (#6111) is perfect for many types of craft projects. Constructed from durable American hardwood, the 37.5" stand holds hoops, stretcher bars and scroll frames of all types and sizes. The stand easily adjusts for height, angle and right or left hand use. The Universal Craft Stand allows you to work comfortably with both hands for better stitch control. (Scroll Frame Not Included).
EDM-5850 Adjustable Lap and Table Stand with Split Rail Scroll Frame
by F.A. Edmunds
$23.49 $21.99
  Add to Wish List
The Adjustable Lap and Table Stand comes complete with an 8.5"x24" rotating split rail scroll frame which will accomodate fabrics up to 21" wide. The convenient lap stand has three height settings that allow you to work with both hands free for better stitch control. This frame was designed to be used on top of a table, relaxing in bed, or while sitting in your favorite chair.
HC-820 Handi Clamp 8" x 20" Scroll Frame Set
by F.A. Edmunds
$35.99 $32.99
  Add to Wish List
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
EDM-2997 Wood Split Rail Scroll Frame - 8.5" x 24"
by F.A. Edmunds
$16.39 $15.36
  Add to Wish List
8.5" x 24" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
EDM-2996 Wood Split Rail Scroll Frame - 6" x 12"
by F.A. Edmunds
$11.00 $9.89
  Add to Wish List
6"x12" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
EDM-2999 Wood Split Rail Scroll Frame - 8.5" x 18"
by F.A. Edmunds
$13.69 $12.83
  Add to Wish List
8.5" x 18" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame. Lightweight and portable these frames keep your work taut and straight as you stitch.
EDM-RF18 Scrolling Ratchet Frame - 18"
by F.A. Edmunds
$20.99 $19.99
  Add to Wish List
18" Stitchers Ratchet Frame is a 2-rail stitching system for use in Cross Stitch, Needlepoint and Embroidery. No Basting, Tacking or Tools Required! Fabric moves back and forth on ratcheting "S" shaped dowels. Smooth reversible ratchets advance your fabric effortlessly. Our dowels are fabricated using the "Yin/Yan" concept for easy fabric retention without basting. Very lightweight and portable.
KC-SB16 Original Wood Lap Frame With 16" Scroll Frame
by K's Creations
$75.99 $69.99
  Add to Wish List
This Original Base adjusts to accommodate a scroll frame, PVC frame or hoop which is 13" to 22" wide. This frame is complete with a 16" scroll frame. It folds completely flat without disassembly for storage. Base and scroll frame are made of hardwoods and are unfinished and sanded. Scroll frame has unfinished 3/4" diameter dowels with 1-1/2" cotton twill tape.
HC-CS Handi Clamp Complete Set
by F.A. Edmunds
$60.99 $49.99
  Add to Wish List
This is the Complete Frame Set which includes two each of the 6" & 8" Spreaders, two each of the 8", 14" & 20" Scroll Rods with Handi Clamps.
ISD-0042 Lap Stitch Little Doodler Stitching Frame
by Doodlin Around Design
$79.99 $69.99
  Add to Wish List
Like its big sister, The Lap Stitch Little Doodler Frame side bars are evenly balanced so the frame can be turned and the fabric angle remains the same. The Lap Stitch Little Doodler comes with 9" and 12" dowels and offers a 7" dowel to dowel working area.
06-2702 Lap Stitch Doodler Stitching Frame
by Doodlin Around Design
$105.00 $89.99
  Add to Wish List
The Doodler frame provides a portable, hands-free solution for all types of needlework. What makes the Doodler special is the evenly balanced design of the side bars, allowing the stitcher to turn the frame around and have it remain evenly balanced. This frame is perfect for the stitcher who loves to do needlepoint, bargello, crewel- embroidery, or any other type of needlework that requires the project to be turned around regularly. The doodler includes 12", 15", and 18" dowels. The working window is 10 inches dowel to dowel.
HC-18 Handi Clamp Rods - 18"
by F.A. Edmunds
$15.99 $14.99
  Add to Wish List
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
EDM-2994 Wood Split Rail Scroll Frame - 4.5" x 9"
by F.A. Edmunds
$10.00 $8.99
  Add to Wish List
4.5" x 9" Mini Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
EDM-4318 Frank A. Edmunds Snap Embroidery Frame 11 x 17 in
by F.A. Edmunds
$16.80 $15.74
  Add to Wish List
These PVC Snap Frames are lightweight, durable and very easy to use. Simply lay your project over the frame and push the clamp down over the project.
EDM-4311 Frank A. Edmunds Snap Embroidery Frame 11 x 11 in
by F.A. Edmunds
$15.50 $14.52
  Add to Wish List
These PVC Snap Frames are lightweight, durable and very easy to use. Simply lay your project over the frame and push the clamp down over the project.
EDM-4306 Frank A. Edmunds Snap Embroidery Frame 6 x 6 in
by F.A. Edmunds
$12.30 $11.52
  Add to Wish List
These PVC Snap Frames are lightweight, durable and very easy to use. Simply lay your project over the frame and push the clamp down over the project.
EDM-4308 Frank A. Edmunds Snap Embroidery Frame 8 x 8 in
by F.A. Edmunds
$13.49 $12.64
  Add to Wish List
These PVC Snap Frames are lightweight, durable and very easy to use. Simply lay your project over the frame and push the clamp down over the project.
EDM-4317 Frank A. Edmunds Snap Embroidery Frame 17 x 17 in
by F.A. Edmunds
$18.26 $17.11
  Add to Wish List
These PVC Snap Frames are lightweight, durable and very easy to use. Simply lay your project over the frame and push the clamp down over the project.
EDM-2930 Stitch N Scroll Lap Stand - 8.5 x 18 inches
by F.A. Edmunds
$43.20 $36.19
  Add to Wish List
Use this new hands-free lap stand in your favorite chair, the car, plane or train. The flexible side stands are easily removed and fold flat for storage. This package contains one Stitch N'Scroll lap stand. Assembled size: 8.5x18 inches.
123-7441 Hook & Loop No Basting System for Scroll Rods
by American Dream Products
$11.68 $10.49
  Add to Wish List
Hook & Loop No Basting System For SCROLL RODS, 3 Yards, 1 inch wide. Hate to baste? Then the Hook & Loop No Basting System is the ticket! Attach your fabric instantly to the scroll rods, remove it, and reattach it in the blink of an eye. Enables you to maintain the tension needed to produce even stitches. 1" wide for easy attaching.
There are two parts to the system which is made of a special Velcro. Each has a sticky back. The first part (for scroll rods) permanently attaches to the scroll rods and is reusable over and over. You can even retrofit your existing rods as it is easy to apply. The second part (for fabric) permanently attaches to the project and is cut off after using. When you start a new project, you only replace the second part which goes on the fabric.
NRG-230-5 Turkish Plastic Embroidery Flexi Hoop - 9.6"
by Nurge
$7.50 $6.49
  Add to Wish List
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 9.6" (245mm) diameter, 0.4" (10mm) thickness.
NRG-230-2 Turkish Plastic Embroidery Flexi Hoop - 5.3"
by Nurge
$5.00 $4.49
  Add to Wish List
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 5.3" (135mm) diameter, 0.4" (10mm) thickness.