Extend the size of your Q-Snap frame with this extension kit. Makes an 11" frame into a 14"x14" frame. Kit includes four 3" extenders and four clamps for a 14" frame. Simply slides on to the end of your existing 11" Q-Snap frame.
These plastic tension knobs replace the wing nuts that come in our hardware bags. They come in a set of four and make it easier to tighten the carriage bolts on all Edmunds frames and floor stands. Does not work on the Edmunds Handi-Clamp line of scroll frames. This package contains 4 plastic knobs. Made in the USA.
Two 17 1/2" Replacement Clamps for 20" Extension Frame Sides. Replacement clamps hold the fabric onto the Q-Snap frame. For use with the 20" Extension Frame
The Adjustable Lap and Table Stand comes complete with an 8.5"x24" rotating split rail scroll frame which will accomodate fabrics up to 21" wide. The convenient lap stand has three height settings that allow you to work with both hands free for better stitch control. This frame was designed to be used on top of a table, relaxing in bed, or while sitting in your favorite chair.
Quality plastic knobs made just for Frank A. Edmunds Handi Clamp scroll frame line! Use these with the PVC clamp system and spreader bars of your choice to create your own custom frame. Set of 4 knobs.
Note: Will not work with the other F.A. Edmunds scroll frames or floor stands.
This oak spreader set is 1 piece to a 3-piece assembly. This 8-inch spreader set completes a Handi-Clamp Scroll Frame size of your choice. With the assembly of 1 set of Handi-Clamp Spreaders, 1 set of Handi-Clamp Rods with Clamps, and 1 set of Handi-Clamp Knobs (all sold separately), the customer can assemble a customizable Handi-Clamp Scroll Frame with plastic clamps closest their project size.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 8" (205mm) diameter, 0.4" (10mm) thickness.
6"x12" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
The Doodler frame provides a portable, hands-free solution for all types of needlework. What makes the Doodler special is the evenly balanced design of the side bars, allowing the stitcher to turn the frame around and have it remain evenly balanced. This frame is perfect for the stitcher who loves... Read more
F.A Edmunds' Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need. Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery, the split rail dowels allow easy... Read more
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 6" x 7.5" (154x190mm) diameter, 0.4" (10mm) thickness.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 9.6" (245mm) diameter, 0.4" (10mm) thickness.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Knobs have been updated to a high quality plastic 3-pointed star - easier to turn!
8.5" x 24" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
This oak spreader set is 1 piece to a 3-piece assembly. This 6-inch spreader set completes a Handi-Clamp Scroll Frame size of your choice. With the assembly of 1 set of Handi-Clamp Spreaders, 1 set of Handi-Clamp Rods with Clamps, and 1 set of Handi-Clamp Knobs (all sold separately), the customer can assemble a customizable Handi-Clamp Scroll Frame with plastic clamps closest their project size.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 7" x 9" (180x230mm) diameter, 0.4" (10mm) thickness.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 4.5" x 6" (115x150mm) diameter, 0.4" (10mm) thickness.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 6.7" (135mm) diameter, 0.4" (10mm) thickness.
Turkish screwless plastic embroidery hoop, with a wood grain finish. Rubbery outer ring to keep your fabric tight! 5.3" (135mm) diameter, 0.4" (10mm) thickness.