Create personalized banners with a unique DIY-friendly cover die!
This die will cut ten banners sized from 0.5" to 5" in half-inch increments, as well as five stars with one single pass through your die-cutting machine! It was designed to work with our Sentiment Banners Hot Foil Pla... Read more
Craft die from Hero Arts featuring the letters of the alphabet A through Z on small banners! Also contains a banner with ampersand (and), a banner with heart, and a blank banner. Each banner 0.47" x 0.62"and#8243;
Hero Arts Fancy Dies are intricate designs and stand-alone cutters... Read more
Impression Obsession craft die featuring 3 banners! US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies. They measure approximately 1/2 x 3 inches, 3/4 x 3 inches, and 1 x 3 inches.
This steel die set is packed with great value! Includes 8 flag/banner shapes with stitching inside and outside of the cutting lines. Largest die is approximately 3.75″x5.25″ and smallest die is approximately 0.375″x0.5″ and dies come tabbed together.
Craft die from Impression Obsession featuring a hanging banner!
This is a US-made steel die compatible with most table-top die cutting machines.This is a set of 9 dies. The assembled banner measures 1-7/8 x 4-7/8 inches.
Craft die from Marianne Design featuring a Christmas lantern, label, bells, and more! Also create a little banner with the lantern dies. 6 pcs, 3.1" x 5.4" 80 x 138 mm
These simple banners are a great fit for most of the sentiments in Lawn Fawn stamp sets. Lawn Cuts custom craft dies are high-quality steel, made in the USA, and are compatible with most die cutting machines! Approximate die sizes: [large banner] 4 3/4"W x 3/4" H, [medium banner] 4 1/4"W x 1/2" H, [small banner] 4"W x 3/8" H. Made with care in the USA!
This steel die set is packed with great value! Includes 3 flags and 1 banner with stitching inside and outside of the cutting lines. Banner is approximately 0.75″x3.5″ and smallest flag is approximately 0.375″x1.25″ and dies come tabbed together.
One can never have too many frame dies, or fishtail flag dies. This set of 3 dies includes a 5"x1.875" frame with a cute row of double stitching on the outer edge, as well as a scalloped inside border. It's large enough to fill about half of your card, which is great for creating gate-fold c... Read more
Our Wonky Stitches Elle-ments steel dies create a whimsical stitched pattern in a variety of mat sizes, banner and tag shapes. 5 attached dies. Outer rectangle die measures: 4" x 5 1/4" ; Inner rectangle die measures: 3" x 4" ; Banner measures 3 1/2" x 7/8" ; Square tag measu... Read more
Are you awaiting the arrival of a little bundle of joy- These cute cuddly critters are ready to celebrate! Coordinates with stamp ALT-S-267936.
Our coordinating dies are designed to work perfectly with our stamp sets for maximum crafting ease and efficiency. All of our dies work great wit... Read more
I never have enough banner dies. Do you? With this set, you'll get 3 sizes of cute stitched fishtail banners measuring 1.4" x 2", 0.8" x 2" and 0.5" x 2". They are the perfect size for stamping small sentiments. The skinniest of the 3 is also great for wrapping around twine t... Read more
Craft die from Impression Obsession featuring a three slim banners!
These are US-made steel dies compatible with most table-top die cutting machines.This is a set of 3 dies. The large flag measures 1 x 7-3/4 and is sized to fit our slimline sentiments cling sets.
Craft die from Hero Arts featuring a banner with the words "Merry Christmas"!
Hero Arts Fancy Dies are intricate designs and stand-alone cutters that produce beautifully detailed cut-outs on paper. Reminiscent of a Hero Arts stamp design, Fancy Dies complement stamps instead of ma... Read more
Create personalized banners with a unique DIY-friendly cover die!
This die will cut ten banners sized from 0.5" to 5" in half-inch increments, as well as five stars with one single pass through your die-cutting machine! It was designed to work with our Sentiment Banners Hot Foil Pla... Read more
Craft die from Hero Arts featuring the letters of the alphabet A through Z on small banners! Also contains a banner with ampersand (and), a banner with heart, and a blank banner. Each banner 0.47" x 0.62"and#8243;
Hero Arts Fancy Dies are intricate designs and stand-alone cutters... Read more
Impression Obsession craft die featuring 3 banners! US-made steel dies compatible with most table-top die cutting machines. This is a set of 3 dies. They measure approximately 1/2 x 3 inches, 3/4 x 3 inches, and 1 x 3 inches.
This steel die set is packed with great value! Includes 8 flag/banner shapes with stitching inside and outside of the cutting lines. Largest die is approximately 3.75″x5.25″ and smallest die is approximately 0.375″x0.5″ and dies come tabbed together.
Craft die from Impression Obsession featuring a hanging banner!
This is a US-made steel die compatible with most table-top die cutting machines.This is a set of 9 dies. The assembled banner measures 1-7/8 x 4-7/8 inches.
Craft die from Marianne Design featuring a Christmas lantern, label, bells, and more! Also create a little banner with the lantern dies. 6 pcs, 3.1" x 5.4" 80 x 138 mm
These simple banners are a great fit for most of the sentiments in Lawn Fawn stamp sets. Lawn Cuts custom craft dies are high-quality steel, made in the USA, and are compatible with most die cutting machines! Approximate die sizes: [large banner] 4 3/4"W x 3/4" H, [medium banner] 4 1/4"W x 1/2" H, [small banner] 4"W x 3/8" H. Made with care in the USA!
This steel die set is packed with great value! Includes 3 flags and 1 banner with stitching inside and outside of the cutting lines. Banner is approximately 0.75″x3.5″ and smallest flag is approximately 0.375″x1.25″ and dies come tabbed together.
One can never have too many frame dies, or fishtail flag dies. This set of 3 dies includes a 5"x1.875" frame with a cute row of double stitching on the outer edge, as well as a scalloped inside border. It's large enough to fill about half of your card, which is great for creating gate-fold c... Read more
Our Wonky Stitches Elle-ments steel dies create a whimsical stitched pattern in a variety of mat sizes, banner and tag shapes. 5 attached dies. Outer rectangle die measures: 4" x 5 1/4" ; Inner rectangle die measures: 3" x 4" ; Banner measures 3 1/2" x 7/8" ; Square tag measu... Read more
Are you awaiting the arrival of a little bundle of joy- These cute cuddly critters are ready to celebrate! Coordinates with stamp ALT-S-267936.
Our coordinating dies are designed to work perfectly with our stamp sets for maximum crafting ease and efficiency. All of our dies work great wit... Read more
I never have enough banner dies. Do you? With this set, you'll get 3 sizes of cute stitched fishtail banners measuring 1.4" x 2", 0.8" x 2" and 0.5" x 2". They are the perfect size for stamping small sentiments. The skinniest of the 3 is also great for wrapping around twine t... Read more
Craft die from Impression Obsession featuring a three slim banners!
These are US-made steel dies compatible with most table-top die cutting machines.This is a set of 3 dies. The large flag measures 1 x 7-3/4 and is sized to fit our slimline sentiments cling sets.
Craft die from Hero Arts featuring a banner with the words "Merry Christmas"!
Hero Arts Fancy Dies are intricate designs and stand-alone cutters that produce beautifully detailed cut-outs on paper. Reminiscent of a Hero Arts stamp design, Fancy Dies complement stamps instead of ma... Read more
801-495-0908
⇅
Cart
Click Picture to Zoom
Everyday Sentiment Banners - Lawn Cuts Die
Pumpkin and Leaves - Penny Black Die