The 60" x 72" vinyl cloth with flannel front Design Wall allows you to arrange patchwork, quilt blocks and quilt sections without pinning or adhesives. 2" grid lines and angle lines are easy to see. Excellent for travel, class or home. 15 grommets for easy hanging.
Create a strong bond between layers of fabric without adding weight or stiffness to a project. Paper backed fusible web for a wrinkle-free application. 17"
Face-it Firm medium/heavyweight fusible interfacing stabilizes and strengthens fabrics to five your project structure and shape, but it's not so stiff that it takes over your fabric. Minimal shrinkage. 20". 100% polyester.
It's forgiving and doesn't hold the fold like those other guys. You can crumple a bag into a ball and it will bounce right back and stand up straight. Use it in place of fleece or batting in a structured bag. Great for table runners and placemats, too. Stiff Stuff = I need some of that stiff stuff... Read more
The "Sew-In Magnetic Snap" is a classier, less obvious handbag closure than the traditional clamp in magnetic style. Encased in sturdy yet pliable plastic you can machine sew it to the lining or interfacings, making it completely invisible on the outside of the bag. The 3/4" magnet is... Read more
A slippery top surface for all your free-motion sewing with a permanent tacky back to hold it place. Free-motion stitching without the use of any adhesives no tape needed. 12"x18"
Heat-n-Bond Ultra-hold is a roll of paper backed, iron-on, no-sew, double-sided adhesive for bonding fabric without the need for pinning. Ultra-hold's no-sew bond is stronger than traditional fusible webs. The solid sheet adhesive means edge to edge coverage for applique shapes on quilts, wall... Read more
HeatnBond FeatherLite is a paper backed, iron-on, sewable, double-sided adhesive for bonding fabric without extra weight or stiffness. This lightweight formula is great for multi-layer pieces, landscape quilts, and wearables since it gets even softer after laundering. Use it in place of pinning or... Read more
30 Pellon Stabilizer Lightweight is a sew-in, non-woven stabilizer for light, crisp support. It is great for use in wall hangings, and kitchen and fashion accessories.
White
Acid-Free 100% Polyester
20" by-the-yard width
Sew-in,... Read more
Pellon 820 Quilter's Grid is a fusible non-woven interfacing with a 1" yellow printed grid for precision piecing of quilting projects. It is helpful with the construction of wall hangings and quilts that utilize cut fabric squares. It makes arranging fabrics... Read more
Pellon 821 Quilter's Grid On-Point is a fusible non-woven with a 1" printed grid on-point for precision piecing of quilting projects. It is helpful with the construction of wall hangings and quilts that utilize cut fabric pieces. It makes arranging fabrics... Read more
Pellon 809 Decor-Bond is a firm, nonwoven, fusible stabilizer that provides extra crispness and support. It is fantastic for use in placemats, director chairs, lamp shades, and drapery headers. For areas that require extra rigidity, use 2 layers.
Stick 'n Stitch is ideal for Hand Embroidery, Cross Stitch, Punch Needle, and Quilting. It is as easy to use as 1-2-3! Simply print or copy your design onto a Stick 'n Stitch sheet, cut out the design, remove the backing, stick onto your fabric and stitch - then rinse away when finished!
The Sulky Soft'n Sheer cut-away permanent stabilizer made of a lightweight textured non-woven nylon, provides great stability to stitch on lightweight knits and woven fabric. Its excellent stretch resistance eliminates pulling or sagging of the embroidery design during stitching and remains with... Read more
These In-R-Form double sided fusible circles are perfect for your next welcome home banner! Laminated, soft and formable, easy to stitch, and needle friendly. These circles will be a great addition to your crafting toolbox. Designed to be used with the Poorhouse Quilt Designs "Welcome Home Banners".
Sulky Cut-Away Plus stabilizer is an acid free permanent, medium weight, non-woven stabilizer with a soft hand and excellent stability for knits and outerwear like jackets, sweaters and sweatshirts. We recommend it as a backing for dense designs, open-weave fabrics with a complex design and... Read more
Pellon 360 EZ-Stitch is a non-woven, perforated, lightweight stabilizer designed for general machine embroidery. It is suitable for most fabrics. The perforated markings allow you to easily tear-away' any excess without pulling or puckering the stitches. It is quick and... Read more
Sulky Cut-Away Plus stabilizer is an acid free permanent, medium weight, non-woven stabilizer with a soft hand and excellent stability for knits and outerwear like jackets, sweaters and sweatshirts. We recommend it as a backing for dense designs, open-weave fabrics with a complex design and... Read more
This pack of Bosal Foam In-R-Form double sided fusible stabilizers are cut into perfect 5 inch circles. Ideal for creating your next banner or sign! This is a laminate stabilizer material that is soft, can be formed with your hands, is easy to stitch, and made of needle friendly foam.
Non-woven, tear away stabilizer to create embroidery and applique designs on knit, napped, quilted, light and dark fabric. 75% Rayon/ 25% Polyester. Sew-In.
Pellon 860F Ultra-Weft is a woven, fusible, weft insertion interfacing for traditional soft tailoring and designer drape in lightweight jackets and coats. It was developed for fabrics such as lightweight wool, cashmere, camel hair, and crepe.
HeatnBond Soft Stretch Ultra is a NO SEW, lightweight iron-on web adhesive specially designed to move with your stretch fabric while maintaining a strong bond! There is no added bulk and maintains a soft hand after fusing. Great to use with knits, stretch denim,... Read more
This pack includes two pieces of Craf-Tex Double Sided Fusible interfacing measuring 18 3/8" x 18 3/8". Simply add your favorite fashion fabric to both sides, apply a press cloth, and press the entire piece with your iron! These pre-cut pieces are designed to be used with the Scalloped... Read more
Bosal's In-R-Form double sided fusible foam stabilizer is great for giving shape to your sewing projects. Just add your favorite fashion fabric to both sides, apply a press cloth and press the entire piece with your iron. Sew bias or simple trim on the edge and you're done! This pre-cut stabilizer... Read more
⇅
Click Picture to Zoom
801-495-0908
Cart
Wishlist
Pinch to Zoom
