|
$60.99 $49.99
| This is the Complete Frame Set which includes two each of the 6" & 8" Spreaders, two each of the 8", 14" & 20" Scroll Rods with Handi Clamps,and eight Wooden Ball Knobs.
|
|
$35.99 $32.99
| The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
|
|
$29.99 $27.89
| The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight! Line features .75-inch scroll rods. All wood received a fine sanding and two coats of finish - no raw wood anywhere! Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
|
|
$15.99 $14.99
| The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
|
|
$33.29 $31.83
| F.A Edmunds' Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need. Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery, the split rail dowels allow easy insertion of your work. The advancing of your pattern "just keeps rolling along", while the 4-way side tension bars keep your work area taut.
|
|
$66.99 $54.99
| Edmunds-Stitcher's Wonder! Floor Stand Scroll Frame. Perfect for needlepoint cross stitch, crewel, embroidery and beading! This adjustable floor standing scroll frame is a combination of the 12x24 inch split rail scroll frame with the universal craft stand. This hands-free needlework frame fits every stitchers needs. This frame allows complete access to your work by tilting up, down and rotating a full 360 degrees. With easy turn knobs, it adjusts from 16 to 45 inches tall in order to locate the most comfortable working position. By just loosening two knobs it fold down to 16 inches for storage. This package contains one 9x24 inch Stitcher's Wonder! Floor Stand Scroll Frame. Made in USA
|
|
$41.79 $34.99
| The Edmunds Universal Craft Stand (#6111) is perfect for many types of craft projects. Constructed from durable American hardwood, the 37.5" stand holds hoops, stretcher bars and scroll frames of all types and sizes. The stand easily adjusts for height, angle and right or left hand use. The Universal Craft Stand allows you to work comfortably with both hands for better stitch control. (Scroll Frame Not Included).
|
|
$23.49 $21.99
| The Adjustable Lap and Table Stand comes complete with an 8.5"x24" rotating split rail scroll frame which will accomodate fabrics up to 21" wide. The convenient lap stand has three height settings that allow you to work with both hands free for better stitch control. This frame was designed to be used on top of a table, relaxing in bed, or while sitting in your favorite chair.
|
|
$16.39 $15.36
| 8.5" x 24" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
|
|
$11.00 $9.89
| 6"x12" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
|
|
$13.69 $12.83
| 8.5" x 18" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame. Lightweight and portable these frames keep your work taut and straight as you stitch.
|
|
$70.00 Sale $55.99
| The Original Lap-Stitch Frame is designed to set on your lap or table and allows you to stitch without holding the frame or fabric. You will not have hoop rings, dirty fabric or uneven stitches in your project. The "starter kit" is equivalent to the Original. The only difference is you get only one set of dowels of 12" suitable for the great part of works. The Lap-Stitch Frame can be used for cross stitch, needlepoint, crewel embroidery, and quilting.
|
|
$15.00 $13.49
| To be used with the Dutch Treat Frame #10-1487
|
|
$62.00 $55.79
| The Dutch Treat frame is a practical working frame for perforated paper. It is designed to be used on the lap or table so that projects will be kept clean and free of kinks. The only thing you have to hold is your needle, because the frame sets on your thighs, a table, or propped on the arm of your chair. One hand goes behind the paper or under the bottom clamp and the other hand stays on top of the paper. All you need to do is pass the needle back and forth. The set contains the oak side bars and a set of knobs (dowels sold separately - 8", 15", or 24").
|
|
$103.00 $92.69
| The Original Lap-Stitch Frame is designed to set on your lap or table and allows you to stitch without holding the frame or fabric. You will not have hoop rings, dirty fabric or uneven stitches in your project. The frame contains four sets of dowels, 6", 9", 12", and 18". This is actually a four-in-one set! The working window is 10 inches from dowel to dowel. The Lap- Stitch Frame can be used for cross stitch, needlepoint, crewel embroidery, and quilting.
|
|
$20.00 $17.99
| To be used with the Dutch Treat Frame #10-1487
|
|
$75.99 $69.99
| This Original Base adjusts to accommodate a scroll frame, PVC frame or hoop which is 13" to 22" wide. This frame is complete with a 16" scroll frame. It folds completely flat without disassembly for storage. Base and scroll frame are made of hardwoods and are unfinished and sanded. Scroll frame has unfinished 3/4" diameter dowels with 1-1/2" cotton twill tape.
|
|
$20.99 $19.99
| 18" Stitchers Ratchet Frame is a 2-rail stitching system for use in Cross Stitch, Needlepoint and Embroidery. No Basting, Tacking or Tools Required! Fabric moves back and forth on ratcheting "S" shaped dowels. Smooth reversible ratchets advance your fabric effortlessly. Our dowels are fabricated using the "Yin/Yan" concept for easy fabric retention without basting. Very lightweight and portable.
|
|
$28.00 $25.19
| To be used with the Dutch Treat Frame #10-1487
|
|
$79.99 Sale $62.39
| Like its big sister, The Lap Stitch Little Doodler Frame side bars are evenly balanced so the frame can be turned and the fabric angle remains the same. The Lap Stitch Little Doodler comes with 9" and 12" dowels and offers a 7" dowel to dowel working area.
|
|
$105.00 $89.99
| The Doodler frame provides a portable, hands-free solution for all types of needlework. What makes the Doodler special is the evenly balanced design of the side bars, allowing the stitcher to turn the frame around and have it remain evenly balanced. This frame is perfect for the stitcher who loves to do needlepoint, bargello, crewel- embroidery, or any other type of needlework that requires the project to be turned around regularly. The doodler includes 12", 15", and 18" dowels. The working window is 10 inches dowel to dowel.
|
|
$10.00 $8.99
| 4.5" x 9" Mini Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
|
|
$11.68 $10.49
| Hook & Loop No Basting System For SCROLL RODS, 3 Yards, 1 inch wide. Hate to baste? Then the Hook & Loop No Basting System is the ticket! Attach your fabric instantly to the scroll rods, remove it, and reattach it in the blink of an eye. Enables you to maintain the tension needed to produce even stitches. 1" wide for easy attaching.
There are two parts to the system which is made of a special Velcro. Each has a sticky back. The first part (for scroll rods) permanently attaches to the scroll rods and is reusable over and over. You can even retrofit your existing rods as it is easy to apply. The second part (for fabric) permanently attaches to the project and is cut off after using. When you start a new project, you only replace the second part which goes on the fabric.
|
|
$75.99 $67.99
| The Z arm allows for complete open sided stitching. Available with a clamp that will hold either Q-Snaps, stretcher bars or any brand scroll frames. This unique "Z" design allows the stitcher to adjust the height of the frame from 4" to 10" depending on their preference. Like the Original Frame series for K's, the Z series is completely collapsible to lay flat for storage without disassembly. The base and clamp are solid oak with an antique golden oak oil rubbed finish. The Z frame is 16-1/2"x5-1/2" when open. If you are looking to accommodate a frame larger than 20" diameter, consider the Original. The double sided hold on the Original frame is more appropriate for larger size work.
|
|
on 01/07/2019
on 08/10/2014 - Great for bigger projects
Click Picture to Zoom
(
