The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Line features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
The Handi Clamp needlework scroll frame line features a PVC clamp system to keep fabric in place and holds tight. Features 3/4" scroll rods. All wood receives a fine sanding and two coats of finish - no raw wood anywhere. Extender bars are oak, scroll rods are ramin wood (less warpage) and knobs are maple. Works without tape, tacks, sewing or split dowels.
The Edmunds Universal Craft Stand (#6111) is perfect for many types of craft projects. Constructed from durable American hardwood, the 37.5" stand holds hoops, stretcher bars and scroll frames of all types and sizes. The stand easily adjusts for height, angle and right or left hand use. The Universal Craft Stand allows you to work comfortably with both hands for better stitch control. (Scroll Frame Not Included).
6"x12" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
8.5" x 18" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame. Lightweight and portable these frames keep your work taut and straight as you stitch.
8.5" x 24" Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
This table clamp is perfect for holding your embroidery hoop steady while you stitch! Comes with a 8.5" diameter, 7/8" thickness hoop. Larger hoops can be purchased separately.
This Original Base adjusts to accommodate a scroll frame, PVC frame or hoop which is 13" to 22" wide. This frame is complete with a 16" scroll frame. It folds completely flat without disassembly for storage. Base and scroll frame are made of hardwoods and are unfinished and sanded. Scroll frame has unfinished 3/4" diameter dowels with 1-1/2" cotton twill tape.
F.A Edmunds' Scroll Frame Set combines two 6" and 9" spreader rails with a set of 12", 18" and 24" split rail dowels to make just about every size Scroll Frame a stitcher would need. Perfect for Cross Stitch, Needlepoint, Crewel and Embroidery, the split rail dowels allow easy insertion of your work. The advancing of your pattern "just keeps rolling along", while the 4-way side tension bars keep your work area taut.
Edmunds-Stitcher's Wonder! Floor Stand Scroll Frame. Perfect for needlepoint cross stitch, crewel, embroidery and beading! This adjustable floor standing scroll frame is a combination of the 12x24 inch split rail scroll frame with the universal craft stand. This hands-free needlework frame fits every stitchers needs. This frame allows complete access to your work by tilting up, down and rotating a full 360 degrees. With easy turn knobs, it adjusts from 16 to 45 inches tall in order to locate the most comfortable working position. By just loosening two knobs it fold down to 16 inches for storage. This package contains one 9x24 inch Stitcher's Wonder! Floor Stand Scroll Frame. Made in USA
The Adjustable Lap and Table Stand comes complete with an 8.5"x24" rotating split rail scroll frame which will accomodate fabrics up to 21" wide. The convenient lap stand has three height settings that allow you to work with both hands free for better stitch control. This frame was designed to be used on top of a table, relaxing in bed, or while sitting in your favorite chair.
Hook & Loop No Basting System For SCROLL RODS, 3 Yards, 1 inch wide. Hate to baste? Then the Hook & Loop No Basting System is the ticket! Attach your fabric instantly to the scroll rods, remove it, and reattach it in the blink of an eye. Enables you to maintain the tension needed to produce even stitches. 1" wide for easy attaching.
There are two parts to the system which is made of a special Velcro. Each has a sticky back. The first part (for scroll rods) permanently attaches to the scroll rods and is reusable over and over. You can even retrofit your existing rods as it is easy to apply. The second part (for fabric) permanently attaches to the project and is cut off after using. When you start a new project, you only replace the second part which goes on the fabric.
This "fanny" frame is perfect for holding your embroidery hoop steady while you stitch! Comes with a 8.5" diameter, 7/8" thickness hoop. Larger hoops can be purchased separately.
4.5" x 9" Mini Split Rail Scroll Frame. The F.A. Edmunds Scroll Frames are made of American hardwoods for years of use. The split rail feature allows you to easily slip your project into the slotted dowel rods eliminating the need for tacking or basting your work to the frame.
18" Stitchers Ratchet Frame is a 2-rail stitching system for use in Cross Stitch, Needlepoint and Embroidery. No Basting, Tacking or Tools Required! Fabric moves back and forth on ratcheting "S" shaped dowels. Smooth reversible ratchets advance your fabric effortlessly. Our dowels are fabricated using the "Yin/Yan" concept for easy fabric retention without basting. Very lightweight and portable.
This 12" circular embroidery hoop is an accessory item available as an additional purchase which fits both the "Fanny Frame" HOP-30560, and the Table Clamp HOP-26360. The thickness of the hoop is 7/8".
This 10" circular embroidery hoop is an accessory item available as an additional purchase which fits both the "Fanny Frame" HOP-30560, and the Table Clamp HOP-26360. The thickness of the hoop is 7/8".
This 11" circular embroidery hoop is an accessory item available as an additional purchase which fits both the "Fanny Frame" HOP-30560, and the Table Clamp HOP-26360. The thickness of the hoop is 7/8".
Circular 8.5" diameter, 7/8" (thick) thickness beechwood embroidery hoop. This thick width hoop is recommended for heavier upholstery weight fabrics, and is a favorite for crewel work.
Circular 4" diameter, 5/16" (slender) thickness beechwood embroidery hoop. This slender width hoop is recommended for light weight fabrics such as batiste and cambric. These are best for embroidering monograms, raised embroidery slips, or any kind of fancywork.
Circular 7" diameter, 5/16" (slender) thickness beechwood embroidery hoop. This slender width hoop is recommended for light weight fabrics such as batiste and cambric. These are best for embroidering monograms, raised embroidery slips, or any kind of fancywork.
Circular 5" diameter, 5/16" (slender) thickness beechwood embroidery hoop. This slender width hoop is recommended for light weight fabrics such as batiste and cambric. These are best for embroidering monograms, raised embroidery slips, or any kind of fancywork.
⇅
Cart
Click Picture to Zoom
Handi Clamp Complete Set
Handi Clamp 8" x 20" Scroll Frame Set
Wood Universal Craft Stand (Scroll Frame Not Included)
Wood Split Rail Scroll Frame - 6" x 12"
Wood Split Rail Scroll Frame - 4.5" x 9"
Scrolling Ratchet Frame - 18"
